• REQUEST QUOTE
• SPEC SHEET
• PARTS DIAGRAMS
  OPERATOR'S MANUAL
• NEWS RELEASE

Pour Drum with
Morse Model 185R

Every Morse Below-Hook Drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

Model 185R
Kontrol-Karrier with
Top-Rim-Clamp

Below-Hook Drum Lifting Device

More than just a 55-gallon drum dumper...
...a Drum lifter for controlled pouring

Pour rimmed steel, plastic or fiber drum below hook

• Adaptable to a range of drum sizes and types
• Efficient to use with great ease of loading drum
• Drum lifter to pour any drum with suitable top rim
• Drum need not have ribs
• Lift any drum from 4-drum pallet
• Lift vertical or horizontal drum
• Place drum in vertical or horizontal position

Secure Drum with Top-Rim-Clamp (Part # 3540-P)

• Top-Rim-Clamp grips  upper rim securely
• Part 3540-P Top Rim Clamp with screw down mechanism

  • Adjusts to various sized rims by simply tightening as needed

Engage Bottom Rim Foot

• Raise drum slightly
• Extend the Bottom Rim Foot and position under drum
• Bottom Rim Foot is  spring loaded to engage  the bottom rim of drum
• Can eliminate the need to clamp anything around the front of a drum which has appropriate bottom rim
• Use Bottom Rim Foot when tilting or pouring drum with bottom rim
• If drum lacks a bottom rim, place  chain around front of drum when tilting or pouring

Handle Drum

• Up to 23.5" (59.7 cm) diameter
• With minimum height of 34" (86.4 cm)
• Move and pour rimmed steel, plastic or fiber drum
  • Includes 55-gallon plastic drum and 55-gallon steel drum
• Controlled drum pouring with 30:1 gear and sprocket ratio. The gears are covered to increase operator safety.
  • Standard pull chain to control drum rotation
  • Also available with Hand Crank Options
• Capacity
  • 800 Lb. (363 kg) full drum
  • 500 Lb. (227 kg) half-full drum

Ship weight: 203 Lb. (92 kg)
Ship dimensions: L40" W42" H29" (102 x 107 x 74 cm)

Standard drum tilt control is a chain wheel and pull chain as shown above.

Options

• Option X01-185 is hand crank with MORStop Tilt-Brake
• Option X02-185 is a simple hand crank
• Option X03-185 is a 16" (40.6 cm) diameter hand wheel

Model 185R below-hook drum lifting device is shown at left being used to place a drum onto Model 160 4-Wheel Drum Truck in horizontal position. It is equipped with Option X01 Hand Crank with MORStop Tilt-Brake to prevent uncontrolled drum rotation.

IMPORTANT - It is critical to use a model with the correct holder and accessory to lift your drum type and dimensions.

This below-hook drum lifter complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test

Half-Full Drum Rating