You are here: Below-Hook Drum Carriers : 800 Lb. Capacity

Options for MORcinch
Drum Handling System

Below-hook carrier with
Top Rim Clamp Option for your rimmed
55-gallon drum (208 liter drum)

Below-hook drum carrier with Bracket Assembly Option needed for rimless plastic drum. Also recommended to more securely handle a fiber drum.

Below-hook drum carrier with Diameter Adaptor for smaller drum

Available with optional

Below-Hook Drum Carriers
with 800 Lb. Capacity

(363 kg Capacity)

Model 185A and Model 185AM

Morse Kontrol-Karriers lift, rotate and control the pour of a drum at or above your reach

Below-hook drum carrier

Morse Kontrol-Karriers enable you to lift, rotate and control the pour of a drum at or above your reach

Pouring drums above your reach is easy with Morse Kontrol-Karriers. Dispense drum contents with your hoist or crane. Even lift and invert a drum with a drum faucet in place. You control drum tilting 360° in either direction.

These below-hook drum carriers have a pull chain to control the drum tilt with a 30:1 gear and sprocket ratio for pouring drums.

Capacity:

Full drum up to 800 Lb. (363 kg)
Half-full drum* up to 500 Lb. (227 kg)

Every Morse Below-Hook Drum handler is load tested at the factory as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit.

It's a Cinch to handle almost any drum, with the

Drum Handling System

Automatically cinches for 22" to 23.5" (56 to 59.7 cm) diameter steel or fiber drum
Accepts MORcinch Options to handle your plastic drum
Accepts Diameter Adaptors for your smaller drums
Flexible chain cover helps protect the drum sidewall
Includes safety covered gears for your protection
Has durable stress-relief weld joints for years of service

Kontrol-Karriers with 800 Lb. (363 kg) Capacity

Model 185A has the MORcinch Drum Holder with cinch chain and ratchet mechanism to secure your drum in the drum holder.

Model 185AM is like model 185A, but with spark resistant parts.

Model #	Description	Ship Weight	Ship Dimensions
185A	Sized for 55-gallon steel drum (208 liter steel drum)	81 Lb. (37 kg)	L40" W10" H39" (102 x 25 x 99 cm)
185AM	Sized for 55-gallon steel drum (208 liter steel drum). Has Spark Resistant Parts.	81 Lb. (37 kg)	L40" W10" H39" (102 x 25 x 99 cm)

Half-Full Drum Rating
* Half-Full Drum Rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.
Morse below-the-hook drum lifters
Morse below-the-hook drum lifters are manufactured by Morse Mfg. Co., Inc. in East Syracuse, NY 13057. These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following: Rated load markings and unit identification Minimum design safety factor of 3, based on yield strength, for load bearing structural components Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
Last Updated: 07/23/10 Below-Hook Drum Carriers for lifting and pouring drums with your hoist or crane. Drum carriers with 800 Lb. (363 kg) capacity to tilt and pour drum below-hook with hoist or crane.

Below-Hook Drum Carriers with 800 Lb. Capacity