morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Morse 2-5154 Series - Double Drum Rollers

Parts Diagrams and Operators Manual
Morse Model # 2-5154-3
Double Stationary Drum Roller


Stationary Drum Roller details
drum roller video

  Double Stationary Drum Roller
Model # Serial # Range Drum Roller
Operator's Manual
with Parts Diagram
Gear Box
Operator's Manual
and Parts Diagram
Wiring Diagram
Spare Parts Kit
2-5154-3 284797 to ______ PL2-5154(284797-______) 2914-P 4733-P RP5154-02
Control Package (Sold Separately)
Model # Serial # Range Description Control Box Control Box
Wiring Diagram
CP-2-5154-1-115 289307 to ______ 1-Phase 115V 50/60Hz with variable frequency drive 5555-P 5555-P_wiring
000000 to 289306  5555-P_wiring
CP-2-5154-1-230 ALL 1-Phase 230V 50/60Hz with variable frequency drive 5556-P 5556-P_wiring
CP-2-5154-3-230 ALL 3-Phase 230V 50/60Hz with variable frequency drive 5557-P 5557-P_wiring
CP-2-5154-3-460 ALL 3-Phase 460V 50/60Hz with variable frequency drive 5558-P 5558-P_wiring
Guard Enclosure Kit (Sold Separately)
Option # Serial # Description Installation Instructions  
GEK-2-5154-3 ALL Guard Enclosure Kit with Safety Interlock Installation Instructions  
Option # Serial # Description    
POLY-2-5154 ALL Factory Installed Option to roll a plastic drum  
POLY-2-5154FI ALL Kit for Field Installation to roll a plastic drum  
1-5-2 ALL Pair of Idler Attachments to roll 1 to 5-gallon pails  
1-5-1 ALL Idler Attachment to roll a 1 to 5-gallon pail  

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Last Updated: 06/19/19