morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Drum Tumblr Logo

Parts Diagrams and Operators Manual
for Morse
Model # 309-E1-50

Drum Tumbler

Drum Tumbler web page

  Drum Tumbler  
Model # Serial # Range Operator's
Overview Drum Holder
Gear Box
Operator's Manual
and Parts Diagram
Spare Part Kit
309-E1-50 295663 to ______ OM309
4549-P 290-E1-50-2P RP309-01
277359 to 295662 OM309
4549-P 290-E1-50-2P RP309-01
200000 to 277358 OM309
5363-P 4549-P 290-E1-50-2P RP309-01
Control Package
Option # Serial # Range Description Operator's Manual  
CP-309-E1-220-50 277359 to ______ Control Package for Explosion-Proof 1-Phase 220V 50Hz OMCP-309-EXP 2969C-P
Guard Enclosure Kit
Option #   Description Installation Instructions  
GEK-309-E1   Guard Enclosure Kit with Safety Interlock Installation Instructions  

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Last Updated: 05/28/19