morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Tilt-To-Load Drum Tumbler

Parts Diagrams and Operators Manual
for
Morse Model # 310-A
Tilt-To-Load Drum Tumbler

 

Tilt-To-Load Drum Tumbler Details
and
Tilt-To-Load Drum Tumbler Video

Hydra-Lift Drum Roller Components Hydraulic
Schematic
Recommended
Spare Parts Kit
Serial # Range Operator's Manual
with Parts Diagram
Cylinder Hydraulic
Power Pack
Hydraulic
Motor
Air
Motor
302514 to ______ PL310
(295663-______)
4572-P M404-310-P 6319-P 290-A-2P HS310-03
(236553 to ______)
RP310-01.01
295662 to 302513 PL310
(295663-______)
4572-P M404-310-P 3114-P 290-A-2P HS310-03
(236553 to ______)
RP310-01.01
283821 to 295662 PL310
(283821-295662)
4572-P M404-310-P 3114-P 290-A-2P HS310-03
(236553 to ______)
RP310-01.01
Earlier Serial Numbers in 2nd chart below
 
Guard Enclosure Kit (Sold Separately)
Model # Serial # Description Installation Instructions    
GEK-310-A ALL Guard Enclosure Kit with Safety Interlock Installation Instructions    
 

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

MSDS for: Hydraulic Fluid
Air Motor Technical Information

Earlier Serial Numbers
drum tumbler

Operator's Manuals and Parts Diagrams
for
Morse Tilt-To-Load Drum Tumbler

Model 310-A

 

Get Acrobat Reader To access these documents a pdf reader such as Adobe Reader is required.

 

Component Parts Diagrams

 
Serial #
Range
Operator's
Manual
Cylinder Hydraulic
Power
Pack
Hydraulic
Motor
Motor Hydraulic
Schematic
Upgrade Kit
for P.O.
Check Valve
Recommended
Spare Parts Kit
276434 to 283820 PL310(276434-283820) 4572-P M404-310-P 3114-P 290-A-2P 236553 to ______ N/A RP310-01.01
265843 to 276433 PL310(265843-276433) 4572-P M404-310-P 3114-P 290-A-2P 236553 to ______ N/A RP310-01.01
250336 to 265842 PL310(250336-265842) 4572-P M404-310-P 3114-P 290-A-2P 236553 to ______ N/A RP310-01
245949 to 250335 PL310(245949-250335) 4572-P M404-310-P 3114-P 290-A-2P 236553 to ______ N/A RP310-01
241536 to 245948 PL310(241536-245948) 4572-P M404-310-P 3114-P 290-A-2P 236553 to ______ N/A RP310-01
236553 to 241535 PL310(236553-241535) 4572-P M404-310-P 3114-P 290-A-2P 236553 to ______ N/A RP310-01
223163 to 236552 PL310(223163-236552) 4418-P on S/N
234652 to 236552
OR
1279-P on S/N
203639 to 234651
M404-310-P 3114-P 290-A-2P 214964 to 236552 PL4576KIT-P RP310-01
214964 to 223162 PL310(203639-223162) 1279-P M404-310-P 3114-P 290-A-2P 186037 to 214963 PL4576KIT-P  
203639 to 214963 PL310(203639-223162) 1279-P M404-310-P 3114-P 290-A-2P 186037 to 214963 PL4576KIT-P  
186037 to 203638 PL310(186037-203638) 1277-P M404-310-P 3114-P 290-A-2P 186037 to 214963 PL4576KIT-P  
 
Options and Accessories
Option # Description
5014KIT-P Oil Cooler Kit for AC Powered Tilt-To-Load Drum Tumblers
 
MSDS for Hydraulic Fluid
Air Motor Technical Information

Last Updated: 08/26/19

 

Operator's Manuals and Parts Diagrams for Morse Tilt-To-Load Drum Tumbler.