morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029
 

Guard Enclosures with Safety Interlock for Morse Hydra-Lift Drum Rollers
help you meet OSHA requirements

Guard Enclosures for Morse Hydra-Lift Drum Rotators have a safety interlock
to automatically shut off the drum roller when the gate is opened

  Safety Enclosures with Interlock for Hydra-Lift Drum Rollers  

backEasy to load by hand truck or hoist
without the hazards
 of manual handling

Guard Enclosure for Hydra-Lift Drum Rollers

Safety enclosure with interlock to automatically shut off the drum tumbler (drum tumbler sold separately) when the enclosure door is opened. Position the RAISE and ROTATE control mast outside the enclosure for easy access.

Enclosure outside post-to-post dimensions: L88" x W40" x H63.205" (224 x 102 x 161 cm)

Guard Enclosure shown with Drum Roller and Control Package, each Sold Separately

Guard Enclosure shown with Hydra-Lift Drum Roller and Controls
Guard Enclosure shown with Hydra-Lift Drum Roller and Controls

Cage with safety interlock to automatically turn the Hydra-Lift Drum Rotator off when the door is open.
Hydra-Lift Drum Roller shown with controls and Guard Enclosure with safety interlock
to automatically turn the Drum Rotator off when the door is open.
Enclosure with Safety Interlock shown with a drum on the Hydra-Lift Drum Rotator.
Cage with safety interlock shown with a drum on the Hydra-Lift Drum Rotator
(Drum Roller and Control Package each sold separately).

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Enclosures with Safety Interlock for Hydra-Lift Drum Rotators  
Guard Enclosure Kit #
for Field Installation
(Drum Rotator Sold Separately)
Fits Drum Rotator
Models
(Sold Separately)
Gate Switch Domestic
Ship Weight
Domestic
Ship Dimensions
GEK-456-1 456-1 or 456-1-50 AC 375 Lb.
(170 kg)
L101" W31" H66"
(257 x 79 x 168 cm)
GEK-456-3 456-3, 456-3-50 or 456-3-575 AC 375 Lb.
(170 kg)
L101" W31" H66"
(257 x 79 x 168 cm)
GEK-456-E1 456-E1 or 456-E1-50 AC Explosion proof 375 Lb.
(170 kg)
L101" W31" H66"
(257 x 79 x 168 cm)
GEK-456-E3 456-E3, 456-E3-50 or 456-E3-575 AC Explosion proof 375 Lb.
(170 kg)
L101" W31" H66"
(257 x 79 x 168 cm)
GEK-456-A 456-A Air Switch 375 Lb.
(170 kg)
L101" W31" H66"
(257 x 79 x 168 cm)

Last Updated: 08/22/18

Enclosures for Morse Hydra-Lift Drum Rollers have safety interlock to automatically shut off the drum roller when the gate is opened.

 
California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov