morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Heavy-Duty Below-Hook
Drum Carrier

Model 185A-HD
Heavy-Duty Kontrol-Karrier

  • Capacity: 1500 Lb. (680 kg)
  • Handle 55-gallon (210 liter) steel drum
  • Handle drum with 22" to 23.5" (56 to 59.7 cm) diameter
  • MORCINCHTM Options to handle almost any drum
Heavy-duty drum carrrier
Model 185A-HD
Heavy-Duty Kontrol-Karrier
Below-Hook drum carrier

Recommended Options

 MORStopTM Tilt-BrakeMORStop Tilt-Brake

Counterweight to keep unit level

Asymmetric Drum Cone with slide gate valve - Morse model # 5-SG-90-23
Asymmetric drum cones
can be used with most below-hook drum carriers. Shown here with model 185A-HD.

Custom Versions

  • Longer arms for taller drum or Drum Cones
  • Stainless steel construction
  • Unit for smaller or larger drum
  • . . .and more

Drum Carrier Features

Morse Model 185A-HD heavy-duty below-hook drum carrier allows you to lift, move and pour a drum weighing up to 1500 Lb. (680 kg), or a half-full* drum up to 800 Lb. (363 kg). Model 185A-HD heavy-duty below-hook drum carrier is equipped with the MORCINCHTM Drum Holder to handle a 55-gallon (210 liter) steel drum with 22" to 23.5" (56 to 59.7 cm) outside diameter between the ribs. It also accepts MORCINCHTM Options to handle virtually any drum on the market.

To load the drum lifter, simply move the drum holder against the drum and cinch the chain. The standard drum tilt control is a chain wheel with 12' (365 cm) chain loop. Lift the drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle.

The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStopTM Tilt-Brake Option, braking is immediate and automatic. To have the MORStopTM Tilt-Brake Option installed on your new Kontrol-Karrier, order Option # 3900i-P.

Important noteIMPORTANT - It is critical to use the correct holder and accessory to lift your drum type and dimensions.

Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co., Inc. in Syracuse, NY 13208 U.S.A.

Note about Load Test and Certificate
IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

See Load Test Video

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
MORcinch Options and Accessories
Part # Description Domestic
Ship Weight
Ship Dimensions
4560-P Top Rim Clamp for your 55-Gallon Rimmed Plastic or Fiber Drum 11 Lb.
(5 kg)
L20" W9" H17"
(51 x 23 x 43 cm)
4556-P Bracket Assembly for Rimless Plastic Drum, and recommended
to more securely handle Fiber Drum
18 Lb.
(8 kg)
L41" W15" H7"
(104 x 38 x 18 cm)
4622i-P  Factory Installed Counterweight on new unit to level Kontrol-Karrier when suspended from hook    
4622-P Counterweight Kit for unit made March 2009 or later (serial # 0309 to ____) 50 Lb.
(23 kg)
L16" W12" H17"
(41 x 31 x 43 cm)
481-P Counterweight Kit for unit with serial number prior to March 2009 (serial # ____ to 0209) 45 Lb.
(20.4 kg)
55/30 Series Diameter Adaptors for your smaller drums
5115i-P MORCINCHTM Web Strap and Ratchet drum holder
X02-185 Hand Crank
X03-185 Hand Wheel
3900i-P MORStop Tilt-BrakeMORStopTM Tilt-Brake factory installed on new unit
3900-P MORStop Tilt-BrakeMORStopTM Tilt-Brake for field installation on existing unit
Custom Heavy-Duty Below-Hook Drum Carriers
Model # Description
185S-HD Longer arms on frame to provide clearance for taller drum, or to allow use of Morse Drum Cones for controlled pouring
Frame and drum holder made of type 304 stainless steel
Painted with USDA approved white epoxy
Unit with "nested" lifting point to reduce required head room
55/30S Custom Diameter Adaptor for other sizes or types of drum

* Half-Full Drum Rating

Half-full drum rating for below-hook drum carrier is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Last Updated: 03/13/19

Heavy-Duty Below-Hook Drum Carrier - Model 185A-HD Heavy-Duty Kontrol-Karrier. Options and Accessories.

California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to