morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Below-Hook Drum Carrier
with Spark Resistant Parts

Model 185AM Kontrol-Karrier

Below-hook drum carrier - Model 185A

Model 185AM Kontrol-Karrier Below-Hook drum carrier with spark resistant parts

Recommended Options

Asymmetric Drum Cone with slide gate valve - Morse model # 5-SG-90-23
Asymmetric drum cones
can be used with most below-hook drum carriers. Shown here with model 185A-HD.

Custom Versions

  • Longer arms for taller drum or Drum Cones
  • Stainless steel construction
  • Unit for smaller or larger drum
  • . . .and more

Drum Carrier Features

Spark resistant drum carrier Morse Model 185AM below-hook drum carrier with spark resistant parts allows you to lift, move and pour a drum weighing up to 800 Lb. (363 kg), or a half-full* drum up to 500 Lb. (227 kg) Model 185AM below-hook drum carrier is equipped with the MORCINCH TM Drum Holder to handle a 55-gallon (210 liter) steel drum with 22" to 23.5" (56 to 59.7 cm) outside diameter between the ribs. It also accepts MORCINCH TM Options to handle virtually any drum on the market.

The KEY ADVANTAGE of Model 185AM is that it has spark resistant parts intended to reduce the possibility of mechanical sparks as a possible source of ignition. They are not a substitute for grounding and bonding for preventing static electricity discharges. Metals such as Monel are used in the drum holder bands and at the lifting eye. Stainless steel chain is used instead of carbon alloy steel chain across the front of the drum. Pull chain for the tilt-control drive has brass chain substituted for the steel chain.

[an error occurred while processing this directive]

To load the drum lifter, simply move the drum holder against the drum and cinch the chain. Lift the drum and rotate drum 360 degrees in either direction. Drum can be held at any tilt angle. The standard drum tilt control is a chain wheel with 12' (3.66 meter) chain loop.

The slots in the bottom of the frame can be used as a chain lock to prevent the drum from tilting. To do so, crisscross the chain and insert one side into each slot. If the drum handler is equipped with the MORStop TM Tilt-Brake Option, braking is immediate and automatic. To have MORStop TM Tilt-Brake Option installed on your new Kontrol-Karrier, order Option # 3900i-P.

Important noteIMPORTANT - It is critical to use the correct holder and accessory to lift your drum type and dimensions.

Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co., Inc. in Syracuse, NY 13208 U.S.A.

Note about Load Test and Certificate
IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

See Load Test Video

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
MORCINCH Options and Accessories
Part # Description Domestic
Ship Weight
Domestic
Ship Dimensions
4560M-P Spark Resistant Top Rim Clamp for your 55-Gallon (210 liter) Rimmed Plastic or Fiber Drum 11 Lb.
(5 kg)
L20" W9" H17"
(51 x 23 x 43 cm)
4556M-P Spark Resistant Bracket Assembly for Rimless Plastic Drum, and recommended to more securely handle Fiber Drum 18 Lb.
(8 kg)
L41" W15" H7"
(104 x 38 x 18 cm)
4623i-P Factory Installed Counterweight on new unit to level Kontrol-Karrier when suspended from hook    
4623-P Counterweight Kit for existing unit with serial number 0409 to ____ (April 2009 to present) 30 Lb.
(14 kg)
L19" W4" H3"
(48 x 10 x 8 cm)
471-P Counterweight Kit for existing unit with serial number prior to 0409 (Before April 2009) 22 Lb.
(10 kg)
 
55/30M Series Spark Resistant Diameter Adaptors for your smaller drums
X02-185 Hand Crank
X03-185 Hand Wheel
3900i-P MORStop Tilt-BrakeMORStop TM Tilt-Brake factory installed on new unit
3900-P MORStop Tilt-Brake MORStop TM Tilt-Brake for field installation on existing unit

* Half-Full Drum Rating

Half-Full Drum Rating for below-hook drum carrier is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum.

Last Updated: 03/13/19

Below-Hook Drum Carrier with spark resistant parts - Model 185AM Kontrol-Karrier Options and Accessories

 
California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov