morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Manual Drum Lift and Tilt Controls

Images of Manual Lift and Tilt Controls on Morse Drum Handling Equipment  

Use the hand pump to raise and lower the drum. Each stroke of the hand pump lifts the drum about 1" (2.5 cm).
Manually tilt the drum by pulling the loop of chain through the chain wheel. You control drum tilting 360 degrees in either direction for controlled drum pouring.

Hand pump used to lift drum
Hand pump for drum lift

  1. Pump handle to LIFT drum
  2. Release valve to LOWER drum

Chain wheel for drum tilt control
Chain wheel and pull chain loop for drum tilt control


Morse manual drum lift and drum tilt controls.

Last Updated: 03/13/19

California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to