Morse model 85I

All about Model 85I

Model 85i is made of carbon steel with powder coat finish
Web Strap and Ratchet secures drum in holder
Handles RIBBED 22.5” (57 cm) diameter STEEL drum
For PLASTIC or FIBER drum, install correct MORCINCH^TM Kit to prevent drum slipping length-ways
For smaller drum, insert correct size Diameter Adapter

Lift, move and pour drum WITHIN REACH with your hoist
Grasp drum to turn BY HAND
Tilt drum 360° in either direction
Lock drum upright to transport
Lock drum in horizontal position to pour
Release tilt locks for hand-controlled tilt at any angle
Lift and invert drum with drum faucet in place
IMPORTANT: Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity, and ships with Load Test Certificate enclosed

	55/30-14.5 Diameter Adapter for 14"-14.5" (35.6 -36.8 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.
	55/30-16 Diameter Adapter for 15.5"-16" (39.4 -40.6 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.
	55/30-17.5 Diameter Adapter for 17"-17.5" (43.2 -44.5 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.
	55/30-19 Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum.
	55/30-20.5 Diameter Adapter for 20"-20.5" (50.8-52.1 cm) diameter drum. Measure diameter 1/2-way down drum.
	55/30-22 Diameter Adapter for 21.5-22" (54.6-55.9 cm) diameter drum. Measure diameter 1/2-way down drum.
	4556-P KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler.
	55/30-32G Diameter Adapter for 32-gallon Rubbermaid Brute model 2632
	55/30-44G Diameter Adapter for 44-gallon Rubbermaid Brute model 2643
	4560B-P KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum.
	6075I-P OPTION: Factory Installed cinch chain in place of ratchet web strap on NEW 80i, 85i or 82A Series
	6315-P Kit: Add fork pockets to below-hook lifter 85A, 85G, 85i, 185A, 185A-HD or 185G-HD. NOT for spark resistant. Fork openings are 4.75" x 2.5".