Modell 41M

Funkenbeständiger Haken zum Heben von Fässern unter dem Haken. NUR für horizontale 55-Gallonen (210 L) Stahlfässer. Wird mit Lasttest-Zertifikat geliefert.

Alles über Modell 41M

Spezifisch für Modell 41M
  • Spark resistant parts reduce risk of mechanical sparking in environments with flammable or explosive materials
  • ONLY to lift a horizontal 55-gallon (210 liter) steel drum with your hoist or crane
  • WARNING: Do NOT attempt to lift an upright drum with this device
  • Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
Alle Drum Lifters
  • Each Morse below-hook drum lifter is load tested and ships with load test certificate
  • Complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
  • Comply with ANSI/ASME B30.20 standard. They are ASME BTH-1 DESIGN CATEGORY B and ASME BTH-1 SERVICE CLASS 1.

Keine Optionen verfügbar.

Nicht verfügbar.
1Spec Sheet
1Dimensions
1Certificate of Compliance
Operators Manual
Serieller Bereich
CE-Konformitätserklärung
edit icon400000 - Aktuell
Haken zum Heben von Fässern
edit icon0705 - Aktuell
Below-Hook Drum Lifters | Safe, Reliable Drum
Below-Hook Drum Lifters | Safe, Reliable Drum Video
Zum Abspielen klicken
Haken zum Anheben von Fässern - Modell 41
Haken zum Anheben von Fässern - Modell 41 Video
Zum Abspielen klicken

Spezifikationen

Volle Kapazität

454.00 kg (1000 Lb.)
Länge des Schiffes 50.80 cm (20")
Breite des Schiffes 12.70 cm (5")
Höhe des Schiffes 10.16 cm (4")
Gewicht des Schiffes 2.72 kg (6 Lb.)
Schiffsklasse 60