Modell 90-85

Ersetzt durch 92

Verti-Karrier Lastaufnahmemittel für 85-Gallonen-Stahlfässer (322 L). Ferngesteuerter Greif- und Auslösemechanismus. Wird mit Lasttest-Zertifikat geliefert.

Alles über Modell 90-85

Spezifisch für Modell 90-85
  • Lift an upright RIMMED 85-Gallon (322 Liter) Steel Drum
  • Lift drum with 25-1/16" to 25-7/16" (63.7 to 64.6 cm) diameter under the top rim
  • Engages under top rim of drum. Requires drum top to be on and secure
  • Alternating Grip and Release Mechanism enables loading drum in or retrieve from hard-to-reach areas
  • Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
Alle Drum Lifters
  • Each Morse below-hook drum lifter is load tested and ships with load test certificate
  • Complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
  • Comply with ANSI/ASME B30.20 standard. They are ASME BTH-1 DESIGN CATEGORY B and ASME BTH-1 SERVICE CLASS 1.

Keine Optionen verfügbar.

Nicht verfügbar.
1Certificate of Compliance
Operators Manual
Serieller Bereich
CE-Konformitätserklärung
edit icon400000 - Aktuell
Drum Lifter
edit icon0814 - Aktuell
edit icon0000 - 0714
Parts Diagram
Drum Lifter
edit icon0814 - Aktuell
edit icon0000 - 0714

Keine Videos verfügbar.

Spezifikationen

Volle Kapazität

454.00 kg (1000 Lb.)
Länge des Schiffes 99.06 cm (39")
Breite des Schiffes 68.58 cm (27")
Höhe des Schiffes 25.40 cm (10")
Gewicht des Schiffes 26.79 kg (59 Lb.)
Schiffsklasse 85