Modell 91

Lastaufnahmemittel für 22,5"-26" (57,2-66 cm) Stahlfässer. Legt ein 55-Gallonen-Stahlfass in ein Umverpackungs-/Rettungsfass. Wird mit Lasttest-Zertifikat geliefert.

Alles über Modell 91

Spezifisch für Modell 91
  • Lift an upright RIMMED Steel 55-gallon (210L) Drum with your hoist
  • Lift drum with 22.5" to 26" (57.2 to 66 cm) diameter under the top rim
  • Simple tong-like geometry with narrow profile drum lifter with broad faced grip pads
  • Place steel 55-gallon (210 liter) drum into overpack or salvage drum
  • Lift steel 85-gallon (322 liter) overpack drum
  • Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
Alle Drum Lifters
  • Each Morse below-hook drum lifter is load tested and ships with load test certificate
  • Complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
  • Comply with ANSI/ASME B30.20 standard. They are ASME BTH-1 DESIGN CATEGORY B and ASME BTH-1 SERVICE CLASS 1.
2832X-P thumbnail image 2832X-P

Vollständig umschlossene Kiste für den Export von 1 Stück des Modells 91 oder 92. Die Kiste ist wärmebehandelt und IPPC-konform zertifiziert.

Nicht verfügbar.
Operators Manual
Serieller Bereich

CE-Konformitätserklärung

Drum Lifter
Parts Diagram

Drum Lifter
Operators Manual and Parts Diagram

Drum Lifter

Keine Videos verfügbar.

Spezifikationen

Volle Kapazität

454.00 kg (1000 Lb.)

Länge des Schiffes 53.34 cm (21")
Breite des Schiffes 25.40 cm (10")
Höhe des Schiffes 45.72 cm (18")
Gewicht des Schiffes 8.63 kg (19 Lb.)
Schiffsklasse 100