Stainless Steel Below-Hook Drum Lifter - Model 92-SS

Model 92-SS - Use handle to position on top of drum

Model 92-SS

Stainless Steel Below-Hook Drum Lifter for 18-26" (46-66cm) diameter RIMMED steel, plastic or fiber drum. Ships with load test certificate.

All about Model 92-SS

Specific to Model 92-SS

Model 92-SS is made of type 304 stainless steel with bead blast finish. Welds are NOT ground smooth or polished.
Lift an upright RIMMED steel, plastic or fiber drum with your hoist
Lift drum with 18" to 26" (45.7 to 66 cm) diameter under top rim
Drum lid MUST be on and secure
Self-adjusting tong-like action when you raise the hook
Narrow profile drum lifter to enable you to place steel 55-gallon (210 liter) drum into overpack or salvage drum
Lift steel 85-gallon (322 liter) overpack drum
Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate

All Drum Lifters - Barrel Lifters

Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
- Rated load markings and unit identification
- Minimum design safety factor of 3, based on yield strength, for load bearing structural components
- Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
- All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

2832X-P

Fully Enclosed Crate for export of 1 of model 91 or 92. Crate is heat treated and certified IPPC compliant.

Not available.

2Spec Sheet

Spec Sheet

Serial range

92 Series Drum Lifters

Current

Stainless Steel Characteristics

Current

1Dimensions

1Certificate of Compliance

5Operators Manuals and Parts Diagrams

Operators Manual

Serial range

CE Declaration of Conformity

400000 - Current

Drum Lifter

1015 - Current

Parts Diagram

Drum Lifter

1015 - Current

0414 - 0915

0000 - 0314

Drum Lifters Video
Click to play

Full capacity

454.00 kg (1000 Lb.)