Model 41

Hak do podnoszenia beczek. TYLKO do poziomej stalowej beczki o pojemności 55 galonów (210 l). Dostarczany z certyfikatem testu obciążenia.

Wszystko o Model 41

Specyficzne dla Model 41
  • ONLY to lift a horizontal 55-gallon (210 liter) steel drum with your hoist or crane
  • WARNING: Do NOT attempt to lift an upright drum with this device
  • Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
Wszystkie Drum Lifters
  • Each Morse below-hook drum lifter is load tested and ships with load test certificate
  • Complies with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
  • Comply with ANSI/ASME B30.20 standard. They are ASME BTH-1 DESIGN CATEGORY B and ASME BTH-1 SERVICE CLASS 1.

Brak dostępnych opcji.

Niedostępne.
1Spec Sheet
1Certificate of Compliance
1Dimensions
Operators Manual
Zakres szeregowy
Deklaracja zgodności CE
edit icon400000 - Aktualny
Haki do podnoszenia Beczek
edit icon0705 - Aktualny
Below-Hook Drum Lifters | Safe, Reliable Drum
Below-Hook Drum Lifters | Safe, Reliable Drum Wideo
Kliknij, aby odtworzyć
Hak do podnoszenia beczek - Model 41
Hak do podnoszenia beczek - Model 41 Wideo
Kliknij, aby odtworzyć

Specyfikacje

Pełna pojemność

454.00 kg (1000 Lb.)
Długość statku 50.80 cm (20")
Szerokość statku 12.70 cm (5")
Wysokość statku 10.16 cm (4")
Waga statku 2.27 kg (5 Lb.)
Klasa statku 60