Asymmetric Drum Cone shown with Iris Valve, Extension Tube and Clamp Collar (each sold separately)

45 Degree Drum Cone with Valve Flange Model 5-VF-45-23. Shown with Iris Valve and Clamp Collar (each sold separately).

45 Degree Drum Cone with Valve Flange Model 5-VF-45-23. Shown with Slide Gate and Clamp Collar (each sold separately).

Asymmetric Drum Cone with Valve Flange - Model 5-VF-90-23 shown

45 Degree Drum Bead Blast Stainless Steel Cone with Valve Flange

Asymmetric Bead Blast Stainless Steel Drum Cone with Valve Flange

Drum Cones

Angebot anfordern

MEIN MODELL FINDEN

Drum Cones to control dispensing of dry material from your drum!

Entdecken Sie die wichtigsten Funktionen

Control dumping of DRY MATERIAL from a drum

Replace your drum lid with a drum cone

Greatly reduce dust when discharging dry material

Extend the reach of pour

Secure to drum with Clamp Collar

Add Valve to start and stop dispensing (slide gate or iris valve with 6" (15.24 cm) opening)

Select correct drum cone size for each drum diameter

Centered drum cones

Asymmetric drum cones with off-center discharge

Drum Cone capacity exceeds the capacity of all Morse drum handlers when properly secured to drum

Finden Sie das passende Modell für Ihre Bedürfnisse

Produkt	Beschreibung
4556C-P	Kit: Bracket for use with Drum Cone attached attached to drum. Prevents drum from slipping length-ways. Adjust for 30"-38" (76.2-96.5 cm) tall drum.
4556CM-P	Kit: Bracket with Spark Resistant Parts for drum with Drum Cone. Prevents drum slipping length-ways. Adjust for 30-38" (76-96.5 cm) tall.
4556CSS-P	Kit: Stainless Steel Bracket for drum with Drum Cone. Prevents drum from slipping length-ways. Adjust for 30"-38" (76-96.5 cm) tall drum.
IV	Iris Valve Kit with aluminum body and 6" (15.24 cm) diameter opening. CUSTOMER to install on valve flange of Drum Cone.
SG	Slide Gate Valve Kit with 6" (15.24 cm) diameter opening. CUSTOMER to install on valve flange of Drum Cone. NOT for use w/ extension tube XT.
SG-SS	Stainless Steel Slide Gate Kit with 6" (15.24 cm) dia opening. CUSTOMER to install on valve flange of cone. NOT for use w/ extension tube XT-SS.
XT	Extension Tube Kit. 5" (12.7 cm) long with 6" (15.24 cm) diameter. CUSTOMER to install ONLY on Iris Valve or Drum Cone valve flange.
XT-SS	Stainless Steel Extension Tube Kit. 5" (12.7 cm) long with 6" (15.24 cm) diameter.CUSTOMER to install on Iris Valve of Drum Cone valve flange.

Drum Cones

Zuverlässige Qualitätsfertigung seit 1923

Das Werk und die Ressourcen von Morse Mfg. bestehen aus qualifizierten Mitarbeitern und zertifizierten Schweißern, Ingenieuren, computergesteuerter Bearbeitung und geschützter Technologie, die in 100 Jahren Betrieb entwickelt wurde.

Kontakt