Model 1-305-1 Single Can Tumbler with Timer. Pail mixer blends ingredients inside a sealed can.

Model 2-305-1 Double Can Tumbler with Timer

Guard Enclosure Kit with Interlocks. Shown installed on Double Can Tumbler (sold separately).

305 Series Can Tumblers

Morse PailPRO Can Tumblers provide aggressive corner-over-corner mixing action. Mix products right inside your sealed cans or pails with these can rotators to reduce hazards and save clean-up. Use your pail and can mixer to blend the contents of closed 1 to 5 gallon (4 to 20 liter) pails or cans .

Entdecken Sie die wichtigsten Funktionen

Morse 5-Gallon Can Tumblers mix or agitate small batches quickly and economically

Re-homogenize settled ingredients

Use as pail or bucket mixer to blend liquid or dry materials

Tumble pails of parts with media to deburr or polish them

Tumble steel can or plastic pail with up to 12.5" (31.75 cm) diameter, and from 4.5" to 16.5" (12 to 42 cm) tall.

Fixed Tumbling Speed: 23 RPM (19 RPM on 50Hz models)

Morse 5-Gallon Can Tumblers rotate in one direction only; they do NOT shake or oscillate cans

Electric or Air Powered Can Tumblers

IMPORTANT: OSHA, CSA and EU require enclosure with interlock

Guard Enclosure Kit is sold separately

Finden Sie das passende Modell für Ihre Bedürfnisse

Modell	Motorart	Phase	Spannung / Stromaufnahme	Trommel-Drehzahl	Kontrollpaket	Guard-Gehäuse-Kit
1-305-1-50	50Hz	1	110v / 7.2	19 RPM	CP-305-1-220-50	GEK-1-305-1-50
1-305-1-50-CE	50Hz	1	220v / 3.6	19 RPM
1-305-3-50	50Hz	3		19 RPM	CP-305-3-230-50 CP-305-3-400-50	GEK-1-305-3-50
1-305-3-50-CE	50Hz	3	400v / 0.6	19 RPM
1-305-A	-			23 RPM		GEK-1-305-A
2-305-1-50	50Hz	1	110v / 7.2 220v / 3.6	19 RPM	CP-305-1-220-50	GEK-2-305-1-50
2-305-1-50-CE	50Hz	1	220v / 3.6	19 RPM
2-305-3-50	50Hz	3		19 RPM	CP-305-3-230-50 CP-305-3-400-50	GEK-2-305-3-50
2-305-3-50-CE	50Hz	3	400v / 0.6	19 RPM
2-305-A	-			23 RPM		GEK-2-305-A

305 Series Can Tumblers

Zuverlässige Qualitätsfertigung seit 1923

Das Werk und die Ressourcen von Morse Mfg. bestehen aus qualifizierten Mitarbeitern und zertifizierten Schweißern, Ingenieuren, computergesteuerter Bearbeitung und geschützter Technologie, die in 100 Jahren Betrieb entwickelt wurde.

Kontakt