Model 1-5154-1

Single Stationary Drum Roller. 1-PH 115/208/230V 60Hz Motor. REQUIRES Electric Controls to Start/Stop. OSHA REQUIRES Enclosure w/ Interlock

Specifications

Drum RPM	20 RPM RPM is based on 22.5" (57.15 cm) diameter drum.
Liquid capacity	454.00 kg (1000 Lb.)
Dryload capacity	136.20 kg (300 Lb.) A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.

Motor Controls sold separately.

All about Model 1-5154-1

Model 1-5154-1 has 1/2 HP single-phase 60Hz TEFC motor
Rolls SINGLE drum at 20 RPM, based on 22.5" (57 cm) diameter
REQUIRES Electric Control Box to Start / Stop Rotator
Electric Control Package sold separately
- Model 5998-P for single-phase 115V 60Hz power supply
- Model 5999-P for single-phase 208-230V 60Hz power supply
Guard Enclosure with Interlock sold separately as Kit GEK-1-5154-1

IMPORTANT: OSHA, CSA and EU require enclosure with safety interlock
Roll drums to mix contents
Load horizontal drum onto barrel roller with your hoist or crane and a below-hook drum lifter
Roll STEEL drum with 6" to 28" (15 to 71 cm) diameter, and up to 40" (102 cm) tall
- To roll PLASTIC drum, add POLY Option
- To roll 1-to-5 gallon can, add Idler Attachment(s)
Spring steel grounding strap helps drain possible static charge
Maximum ambient operating temperature: 140° F (60° C)

	1-5-1 Idler Attachment to roll 1 to 5 gallon (20L) can on 456 or 1-5154 Series drum roller. Adjusts for can up to 18" (457mm) tall.
	5998-P Control Package for model 1-5154-1 Drum Roller. 1-Phase 115V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	5999-P Control Package for Model 1-5154-1 Drum Roller. 1-Phase 230V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	gek-1-5154-1 Kit: Enclosure with Safety Interlock for CUSTOMER to install with 1-5154 1-Phase AC Single Drum Roller. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
	2845Xi-P Fully enclosed crate for export of 1-5154 Series Single Drum Roller. Heat treated and certified IPPC compliant.
	5516Xi-P Fully enclosed crate for export of 456 with GEK (NOT set up). Crate is heat treated & certified IPPC compliant.
	POLY-1-5154 OPTION: Factory Installed on NEW 1-5154 Series to roll PLASTIC drum. 4 Extra wheels & end stops. CANNOT order without drum roller.