SDS / MSDS - Safety Data Sheets

Safety Data Sheets are not necessary for Morse Drum Handlers because they are Articles as defined in 29 CFR 1900.1200 Paragraph (C).

Articles means a manufactured item other than a fluid or particle:

• (i) which is formed to a specific shape or design during manufacture;
• (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and
• (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees.

Related article: Drum Handling Safety

• Noco Premium Plus Hydraulic Oil used for Morse models with power hydraulic pump
• 1 Quart container of hydraulic oil (3983-P) used in hand pump of models 400A-60, 400A-72, 400AM-60 and 400AM-72

Article: Using the Correct Hydraulic Oil

• Mobil SHC634 Oil used through Nov. 2005
• Klubersynth Oil used since Dec. 2005

• BLUE Powder Coat
• GOLD Powder Coat
• Silver powder coat finish: Durable two coat system comprised of a corrosion protective zinc rich primer base coat, and an opaque weather resistant powder coating.
• Zinc Rich Primer: Spec Sheet and SDS
• Weather Resistant Powder Coat: Spec Sheet and SDS
• TIGER Drylac FDA Compliant Powder Coat typically used on kitchen surfaces, food transportation containers and pharmaceutical handling and storage.
• Spec Sheet FDA Compliant TIGER Drylac powder coating
• SDS for white TIGER Drylac powder coating

• 12V Deep Cycle Lead-Acid Battery - Morse part # 388-P
• Green Battery - Lithium Iron Phosphate Rechargeable Battery - Morse part # 388GREEN-P
• Sealed Battery for Export - Morse part # 388SEALED-P
• 12V Sealed AGM Lead Acid Battery - Morse part # 6563-P