Drum Handling Safety and Solutions

Correct procedures for handling 55-gallon (210 liter) steel, fiber and plastic drums.
Safety Conscious drum handling solutions
Solve Drum Handling Problems

drum handling safety

Risks of handling a heavy 55-gallon (210 liter) drum

It can be hazardous to move a drum with your forklift
Have you seen people manually roll a drum on the bottom rim?
Ever see someone roll a drum down a makeshift ramp?
There's a better way to mix the contents of a drum than rolling it on the floor!

Video: MUCH More than Drum Handling

Recommendations for drum handling safety... Drum handling Safety Tips

Heavy drums should always be moved with proper drum handling equipment. Use a drum truck, forklift attachment, below-hook drum lifter or other equipment specifically designed for drum handling.

A full 55-gallon (210 liter) steel drum can weigh over 2000 pounds (907kg), with typical weights of 400 to 800 Lb. (180 to 363 kg). When being moved, the contents of your drum may shift inside, making the drum difficult to control or even dangerous. There are also special considerations when handling a plastic drum or a fiber drum. Conditions such as restricted spaces and slippery or uneven floors can entail greater risks.

Mishandling a heavy drum can cause serious injury, damage the drum, waste valuable contents or contaminate the environment. Common injuries include a strained back, crushed fingers or hands, and foot trauma. Incidents of dropped drums, or drums rolling out of control, can also cause spills and damage.

Identify the Hazards:

Drum Handling Problems

Back Strain and Repetitive Motion Injuries
Manually Moving Drums On/Off Pallets
Safely Handling PLASTIC drums
Risky Bare Fork Drum Handling

Out of Control Drum Tilting
Racking Drums for Storage and Dispensing
Overloaded Drum Handler
Mixing Drum Contents

Back Strain and Repetitive Motion Injuries

Many people have been hurt trying to manually move a heavy drum. A single incedent can cause injury, loss of time, contaminate drum contents or even a dangerous spill.

The accumulative strain of handling MANY heavy drums can cause serious injury and long-term pain.

Protect Workers

Purpose-Built Drum Trucks Improve Ergonomics to help avoid injury and keep employees safe.

Video: Hand Truck vs. DRUM Truck

Drums too heavy for people to handle safely

Use the Clamp+GO^TM Dolly Handle
to Safely pull or push a heavy drum on a wheeled dolly

Moving Drums On and Off Pallets

It seems it would be simple to move drums off a shipping pallet.
But people get hurt every day doing this!

Protect Employees from Safety Risks

Foot and hand injuries
Moving excesss weight
Unsure grip
Uneven or slippery floors

Utilize Drum Palletizers move drums onto and off pallets, shelves or spill containment.

Safely Handling PLASTIC drums

Plastic Drum Handling

Flexible plastic drums are dificult to grip
Lacks ribs of a steel drum
Some plastic drums don't even have a top rim
Plastic drum can be slippery
Contents can be dangerous

Provide Correct Drum Handling Equipment

Many drum handlers ONLY handle 55-gallon (210 liter) steel drum with ribs. The MORCINCH^TM Drum Handling System has Kits to SAFELY hand a plastic drum, and Diameters Adapters for a smaller size drum.

Top Rim Clamp Video: A Safer Way to Handle Plastic Drums

Install the Top Rim Clamp SAFELY hand a RIMMED plastic drum. Kits to handle any plastic drum are part of the MORCINCH^TM Drum Handling System

Risky Bare Fork Drum Handling

It can be dangerous to move a drum with your forklift. Dropping just one drum can cause damage, worker exposure, loss of valuable contents, or environmental contamination.

There's a Better and Safer Way

There are two categories of forklift attachments to handle drums

Forklift-Karriers to Lift and Pour a drum
MORSPEED^TM Forklift Attachments to Move and stack upright drums

Video: WRONG Way vs. RIGHT Way
to move a drum

MORPEED^TM Forklift Drum Movers are a great time saver for high volume drum applications, like loading and unloading trucks, stcking drums, etc.

Forklift Drum Handlers

GRIP+GO^TM Power Grip Forklift Drum Handler

Out of Control Drum Tilting

A drum suddenly tilt when content shift from one end to the other This can twist the operator's arm, if turning drum with hand crank or hand wheel

Eliminate this Safety Issue

MORStop^TM Tilt-Brake

AUTOMATICALLY holds drum tilt position... so you don't have to!
Prevents drum from turning out of control, even when drum contents shift
Braking is immediate and self-actuating, without additional steps by the user
Works in forward and reverse-tilt directions

MORStop^TM Tilt-Brake

Racking Drums for Storage and Dispensing

Moving drums with bare forks is NOT recommended.
Use a drum racker designed for the job
Drums are stored on their sides should be cradled in a drum rack

A drum rack is ideal for drum

Drum rackers are available for various rack heights Place each drum in a cradle to retain position with faucet or valve installed Serves as dispensing station

MORStak^TM Drum Rackers

Overloaded Drum Handler

truck overloaded with drums — Image by Ben Thompson

Each Morse drum handler is designed to specific standards with engineered safety factors... but if someone exceeds the rated capacity, all bets are off!

Standard Morse models are available to handle up to a 2500 Lb. (1134 kg) drum.

Under no circumstances should any modifications be made to Morse machinery without factory authorization. Each Morse model is designed to perform a specific job, and alterations may result in injury to operator or machine. Also, any modifications would void the warranty.

Engineered drum handling equipment is designed to handle specific types and sizes of drums, as listed in the Operator's Manual for each model.

Mixing Drum Contents

Insertion mixerx risk contamination and worker exposure Clean-up

Solve These Problems with Morse Drum Mixers

Mix contents inside a SEALED drum Reduce risk of contamination Eliminate clean-up

Drum TUMBLERS turn a drum end-over-end for vigorous mixing

Drum ROLLERS turn a horizontal drum on its side for gentle mixing

Safety Conscious Procedures for Drum Handling

Always Use Protective Clothing

Eliminate Risk Factors

Drum handling safety requires a systematic approach to eliminate all possible causes of injury. Take proper precautions if the drum contents are hazardous or flammable. Refer to your SDS for correct handling procedures. Always use appropriate protective clothing such as gloves, steel-toed shoes and eye protection. Environmental factors should be considered, such as adequate lighting and sufficient space to safely handle drums. Of course, cluttered, sloped or slippery floor surfaces increase the risks. Eliminate these conditions as much as possible, and clean up any spills. Replace any missing bungs or lids.

Always use proper equipment designed for the task when handling heavy drums. Train all employees in proper drum handling safety procedures and use of drum handling equipment.

People Kept Speeding by the Safety Barrels... Until They Saw the "Barrel Monster"

Far beyond regular traffic barrels, the looming "Barrel Monster" got people's attention...

Hopefully, the "Barrel Monster" got people to slow down through the construction zone. A student was "arrested for stealing and damaging the traffic barrels." But, "the construction company requested that the charges be dropped and even suggested that another barrel monster in the construction zone could help deter traffic there."

We often ignore signs of danger because we're used to it, or that's "just how we do things."

Don't ignore the dangers of handling heavy barrels. Ensure your employees' ergonomic and safety needs are met.

Improper barrel handling practices lead to many workers being injured every year. Having all staff follow proper barrel handling procedures could prevent many of these injuries, while using safety conscious drum handling equipment will also help minimize the risks.

The variety of drum types and sizes used today presents additional challenges. The equipment to handle steel drums, may not be safe for handling a plastic barrel, or a fiber drum.

And how are you going to handle that 2500 Lb. (1134 kg) drum?

Read what happened to the creator of the "Barrel Monster"

Drum Handling Solutions

Equipment Designed for
Safe Drum Handling

Drum Rackers

Mobile Drum Handlers

Move Empty Drums

Support the leaning drum with your thigh, and face it the way you will travel. Then roll the drum on its lower rim by rotating the upper rim hand over hand.
To lift an empty drum, squat, then straighten your legs. Do NOT bend your back. Correct posture and placement of hands and feet is essential when handling drums.
When rolling an empty drum on its side control it all the way, using your gloved hands. Never roll a drum out of a truck or past a blind corner without posting a guard.
Be alert for burred edges, lock rings and bungs that may catch your gloves or clothing and throw you off balance.

Move Heavy Drums

A partially filled drum may not seem heavy, but shifting contents can make it difficult to handle. It may roll unpredictably and be difficult to control. Handle it carefully to avoid damage and accidents.
Drum handlers are available to safely move heavy steel, fiber and plastic drums.
Specially designed drum trucks are a much safer alternative for moving drums
A safer way to move drum dollies is the Clamp+GO^TM Dolly Handle.
Forklift drum movers are a great time saver for high volume drum applications, like loading and unloading trucks.

Palletize Drums

Several mobile drum palletizers are available
Some customers use a below-hook drum lifter with your hoist
Rapidly load / unload palletized drums with a MORSPEED^TM Forklift Attachment

Dump Drums

Ergonomic drum handlers to lift, move and pour a drum
Mobile drum handlers
Forklift drum handlers
Below-hook drum carriers

Mix Drum Contents

Mixing the contents of a closed drum avoids the hazards of worker exposure, possible contamination and messy cleanup. This can be accomplished with a drum roller or drum tumbler. Choose a drum roller for gentle blending. Whereas a drum tumbler provides a more vigorous mix inside the drum.

Get Help with Drum Handling Problems

If you need to solve a drum handling problem, please email us or call (315) 437-8475 to speak with a Morse professional about the best drum handling safety for your application.

Equipment Designed for
Safe Drum Mixing

Drum Tumblers
to vigorously mix drum contents

Drum Rollers
to gently mix drum contents