Características principales

• Lift and pour 5-gallon (19 liter) plastic or metal pail
• Handles 11" to 12" (28 to 30.5 cm) diameter
• Turn pail end-over-end 360^o in either direction
• Top bracket prevents can from slipping when inverted
• IMPORTANT: Every Morse below-hook handler is individually load tested at the factory at 125% of rated capacity
• Ships with Load Test Certificate enclosed
• Capacity:
  • 200 Lb. (91 kg) full pail
  • 100 Lb. (45 kg) half-full pail with unbalanced, shifting load

Solicitar Presupuesto Gráfico del modelo

The Morse PailPRO ^TM Pail-Karrier 5-Gallon (19 liter) brings ergonomics to below-hook pail handling. Model 85-5 is an ergonomic and safety conscious below-hook Bucket Carrier to lift and pour a 5-gallon (19 liter) plastic or metal pail, 11" to 12" (28 to 30.5 cm) in diameter. The Pail Carrier has a 200 Lb. (91 kg) full pail capacity, and a 100 Lb. (45 kg) capacity for a half-full pail with a shifting load. Securely clamp your pail in the holder of the 5-gallon bucket carrier, then turn the hand wheel to dispense. Turn your pail end-over-end 360 degrees in either direction. The top bracket prevents your can from slipping through the holder when inverted. Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co., Inc. in Syracuse, NY 13208 U.S.A. IMPORTANT: Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed. Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following: Rated load markings and unit identification Minimum design safety factor of 3, based on yield strength, for load bearing structural components Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Información de la Proposición 65 de California

---