Model 310-1
Tilt-To-Load Drum Tumbler. 1-Phase 115/208/230V 60Hz Motor. REQUIRES Controls to Start/Stop. OSHA REQUIRES Enclosure with Interlock.
All about Model 310-1
- Model 310-1 is for single-phase 115/208/230V 60Hz power supply
- Adjust drum rotation from 5 to 20 RPM
- REQUIRES Electric Control Box to Start / Stop Rotator
-
Electric Control Package sold separately
- Model CP-310-1-115 for single-phase 115V 60Hz power supply
- Model CP-310-1-230 for single-phase 208V or 230V 60Hz power supply
- Guard Enclosure with Interlock sold separately as Kit GEK-310-1
- IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
- Vigorous "Corner-Over-Corner" Drum Mixing
- Easy Floor-Level Loading of Upright Drum. Then Tilt Drum Holder Up for Mixing.
-
Load upright drum...
- with drum truck
- with below-hook drum lifter and your hoist
- Mixing inside a closed drum reduces hazards and worker exposure
- Incorporate sediment and homogenize valuable ingredients
- Avoid messy cleanup of insertion mixers
-
Mix contents of steel, plastic or fiber drum
- 28" to 37" (711 to 940 mm) tall
- 18" to 23.5" (457 to 597 mm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum
|
3212Xi-P
Fully enclosed crate for export of 310 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
|
4963-P
2" Cylinder Seal Kit, 4572-P DF |
|
5014I-P
OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler |
|
5480Xi-P
Fully enclosed crate for export of 310 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant. |
|
6589W-P
Top hold down bar for drum holder 5801-P used on 309, 310 and 311 Series Drum Tumblers. |
|
6637I-P
Factory Installed Cinch Chain OPTION |
|
CP-310-1-115
Control Package for model 310-1 for use on a single-phase 115V 60Hz power supply |
|
|
CP-310-1-230
Control Package for model 310-1 for use on a single-phase 230V 60Hz power supply |
|
|
CP-310S
SPL CONTROL PKG, 310 SERIES |
|
|
FAT-310
OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler. |
|
GEK-310-1
Guard Enclosure Kit and Safety Interlock for customer to install with Morse single-phase AC 310 Series Drum Tumbler. |
Optional Kit: Recommended Spare Parts for 310 Series with serial number 265843 to ______
310 Series Tilt-To-Load Drum Tumbler Video Video
Click to play
310 Video
Click to play
Specifications
| Drum RPM | 5 to 20 RPM
RPM is based on 22.5" (57.15 cm) diameter drum. |
| Full capacity |
800 Lb. (363.20 kg) |
| Half capacity | 400 Lb. (181.60 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
WARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
| Phase | 1 |
| Power | 1.4914 kw |
| Style | (Totally enclosed fan cooled) |
| Explosion proof | No |
| Frequency | 60Hz |
| Voltage / Amp draw | 115v / 23.0 |
| Voltage / Amp draw | 208v / 12.0 |
| Voltage / Amp draw | 230v / 11.5 |
| Ship length | 72" (182.88 cm) |
| Ship width | 42" (106.68 cm) |
| Ship height | 47" (119.38 cm) |
| Ship weight | 950 Lb. (431.30 kg) |
| Ship class | 125 |
Products
Get in touch
Contact us Monday through Friday from 8:00 AM to 4:30PM
