Model 201/20-1-50

Portable Drum Roller, Fixed Speed. 1-Phase 110/220V 50Hz Motor. REQUIRES Controls to Start/Stop. CE REQUIRES Enclosure with Interlock.

Specifications

Drum RPM	16 RPM RPM is based on 22.5" (57.15 cm) diameter drum.
Liquid capacity	227.00 kg (500 Lb.)
Dryload capacity	136.20 kg (300 Lb.) A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.

Motor Controls sold separately.

All about Model 201/20-1-50

Model 201/20-1-50 has 1/2 HP single-phase 110/220V 50Hz motor
ONLY for country with 50Hz power supply
Rolls drum on 8 wheels at 16 RPM, based on 57 cm (22.5") diameter
Roll STEEL drum
- With 15 to 71 cm (6" to 28") diameter
- Up to 102 cm (40") tall
To roll PLASTIC drum, add Option POLY-201 with extra wheels and end stop to prevent drum traveling length-ways
To roll 2 to 20 Liter (1 to 5 gallon) size cylindrical can, add Idler Attachment 1-5P
REQUIRES Electric Controls to Start / Stop Rotator
Electric Control Package sold separately
- Model CP-201-1-220-50 for single-phase 220V 50Hz power supply
Safety Enclosure with Interlock sold separately as Kit GEK-201-1

IMPORTANT: OSHA, CSA and EU REQUIRE Safety Enclosure with Interlock
Mix contents of a closed drum with a Compact, Portable Drum Roller
Roll closed drum on its side to blend ingredients
Tipping lever assists tilting drum onto roller. Engages drum 30" (76.2 cm) or taller.
Maximum ambient operating temperature for Electric models: 140F (60C) and AIR models 195F (90.5C).
Factors to consider
- Ribs of rigid steel drum prevent traveling length-ways on roller
- Soft sided plastic drums require support of extra wheels and end stop to prevent drum travel
- Fiber drums require a belted drum roller with end stop

	1-5P Kit: Idler Attachment for CUSTOMER to install on 201 Drum Roller to roll 1-5 gal. can. NOT a drum roller by itself. NOT for belted 201B.
	CP-201-1-220-50 Control Package for 201 Portable Drum Roller. 1-Phase 220V 50Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	GEK-201-1 Kit: Enclosure with Safety Interlock for CUSTOMER to install with 201 1-Phase AC Portable Drum Roller. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
	2844Xi-P Fully enclosed crate for export of 201 Series. Heat treated and certified IPPC compliant.
	4109Xi-P Fully enclosed crate for export of 201 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant.
	POLY-201 OPTION: Factory Installed on NEW 201 Series to roll PLASTIC drum. 4 Extra wheels, end stop & tip assist chain. CANNOT order without drum roller.