Part IV

Iris Valve Kit with aluminum body and 6" (15.24 cm) diameter opening. CUSTOMER to install on valve flange of Drum Cone.

All about Part IV

Specific to Part IV
  • Kit for customer to install on Valve Flange of Drum Cone
  • Revolve handle around valve to open and close flexible sleeve
  • Control flow of wide range of fine to coarse materials
  • Handle materials with bulk density up to 40 Lb./ft3
  • Install aluminum bodied Iris Valve Kit # IV to control flow of fine and coarse materials
All Drum Cones
  • Replace your drum lid with a drum cone
  • Control dumping of DRY MATERIAL from a drum
  • Greatly reduce dust when discharging dry material
  • Extend the reach of pour
  • Install either a slide gate or an iris valve with 6" (15.24 cm) opening to start and stop dispensing
  • Drum cones work with a steel drum or a fiber drum
  • Drum Cone capacity exceeds the capacity of all Morse drum handlers when properly secured to drum with correct size Morse Clamp Collar
  • IMPORTANT: Determine the Correct Size Drum Cone and Clamp Collar
    1. Remove drum lid BEFORE measuring
    2. Measure drum OUTSIDE diameter across Top Rim WITHOUT drum lid

No options available.

Not available.
1Spec Sheet
Operators Manual and Parts Diagram
Serial range
3415A-P Iris Valve
edit icon1007 - Current
Kit IV plus XT - Install Iris Valve PLUS Extension Tube
edit icon0000 - Current

No videos available.

Specifications

Ship length 58.42 cm (23")
Ship width 38.10 cm (15")
Ship height 7.62 cm (3")
Ship weight 4.54 kg (10 Lb.)
Ship class 85