Model 520SS-114

Stainless Steel Vertical-Lift Drum Pourer. Pour up to 106" high. AIR Power drum lift and tilt controls. Welds are NOT ground or polished.

All about Model 520SS-114
Specific to Model 520SS-114
  • Model 520SS-114 has AIR power drum lift and tilt
    • On/Off valve and lift valve raise drum
    • Second valve controls hydraulically-driven drum tilt
    • Manual release valve lowers drum
  • Frame is made of type 304 Stainless Steel with bead blast finish
  • Dump drum at up to 106" (269 cm) high
  • NOT for use in hazardous areas
All Vertical-Lift Drum Pourers
  • Mobile Drum Handler to Lift, Move and Dispense a drum
  • Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
  • MORCINCHTM Drum Handling System
    • Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
    • Install correct MORCINCHTM Kit to handle plastic or fiber drum
    • Insert correct size Diameter Adapter for each smaller drum
3735X-P thumbnail image 3735X-P

Fully enclosed crate for export of 520 or 522 Series. Crate is heat treated and certified IPPC compliant.

55/30SS-14.5 thumbnail image 55/30SS-14.5

Stainless Steel Adapter for 14-14.5" (35.6-36.8 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.

55/30SS-16 thumbnail image 55/30SS-16

Stainless Steel Adapter for 15.5-16" (39.4-40.6 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.

55/30SS-17.5 thumbnail image 55/30SS-17.5

Stainless Steel Adapter for 17-17.5" (43.2-44.5 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.

55/30SS-19 thumbnail image 55/30SS-19

Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum.

55/30SS-20.5 thumbnail image 55/30SS-20.5

Stainless Steel Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum. Measure diameter 1/2-way down drum.

55/30SS-22 thumbnail image 55/30SS-22

Stainless Steel Adapter for 21.5" to 22" (54.6 to 55.9 cm) diameter drum. Measure diameter 1/2-way down drum.

No image available 55/30SS-19B

Stainless Steel Diameter Adapter for 18.5"-19" Drum. Integrated brackets adjust to 38" tall drum. **Measure outside diameter 1/2-way down drum.

55/30SS-32G thumbnail image 55/30SS-32G

Stainless Steel Diameter Adapter for 32-gallon Rubbermaid Brute model 2632

55/30SS-44G thumbnail image 55/30SS-44G

Stainless Steel Diameter Adapter for 44-gallon Rubbermaid Brute model 2643

No image available 1111i-p

option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold.

No image available 2993i-P

Replace 8" dia. front wheels with 5" dia. front wheels.

No image available 3008SSI-P

Option: Factory installed stainless steel hydraulic cylinder, 1.5" x 52", on new 520SS or 525SS series.

4556SS-P thumbnail image 4556SS-P

Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler

4560BSS-P thumbnail image 4560BSS-P

KIT: Stainless steel MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30-55 gallon drum.

5115ssi-p thumbnail image 5115ssi-p

OPTION: Factory installed 2" x 3' Web Strap and Stainless Steel Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain around drum.

No image available 5597SSI-P

OPTION: Factory installed stainless steel ratchet and pawl on NEW stainless steel MORCINCH drum holder

No image available 6349-P

KIT, SEAL, 6318-P, 6319-P

No image available 6388SS-P

STAINLESS STEEL ADAPTOR FOR USE WITH 4556SS-P BRACKET ASSEMBLY IN ORDER TO HANDLE 55 GALLON RUBBERMAID MODEL 2655

No image available 6659-P

SEAL KIT FOR 1-1/2" CLYINDER

No image available CRC-520SS

OPTION: Factory Installed corrosion resistant lift chains on NEW 520SS Series

No image available FGO

OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil

No image available k208-p

AIR MOTOR SERVICE KIT FOR 290-A-2P

No image available LTC4

Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model.

No image available SSC-500

OPTION: Factory Installed 6" diameter stainless steel swivel casters on NEW 500 Series Vertical-Lift Drum Pourer

No image available SSG-PT

OPTION: Factory Installed stainless steel tilt gears and roller chain on NEW power tilt 400 or 500 Series

Not available.
sticky note 4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020
Spec Sheet
Serial range

500SS Series Stainless Steel Vertical-Lift Drum Pourers

Stainless Steel Characteristics
Operators Manual
Serial range

Accessories - Stainless Steel MORCINCH Drum Holder

Air Motor

Air Motor Technical Information

CE Declaration of Conformity

Vertical-Lift Drum Pourer
Parts Diagram
Serial range

Air Motor

Base Assembly

Carriage Assembly

Hydraulic Lift Cylinder

Hydraulic Motor

MORCINCH Drum Holder

OPTION: Stainless Steel Gears, Power Tilt

Power Lift and Tilt Components

Power Train Components
520SS-114 Stainless Steel Vertical-Lift Drum
520SS-114 Stainless Steel Vertical-Lift Drum Video
Click to play

Specifications

Full capacity

800 Lb. (363.20 kg)

Half capacity 500 Lb. (227.00 kg)

Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum.

Dispense height 106.0" (269.24 cm)
Lift style Power lift
Tilt style Power tilt

Proposition 65 warningWARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ship length 74" (187.96 cm)
Ship width 48" (121.92 cm)
Ship height 83" (210.82 cm)
Ship weight 728 Lb. (330.51 kg)
Ship class 150