Model 456-1

Hydra-Lift Drum Roller. 1-Phase 115/230V 60Hz Motor. REQUIRES Controls to Start/Stop. OSHA REQUIRES Enclosure w/ Interlock

Specifications

Drum RPM	5 to 17 RPM RPM is based on 22.5" (57.15 cm) diameter drum.
Liquid capacity	454.00 kg (1000 Lb.)
Dryload capacity	181.60 kg (400 Lb.) A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.

Motor Controls sold separately.

All about Model 456-1

Model 456-1 is single-phase 60Hz electric
Adjust drum rotation speed
REQUIRES Electric Control Box to Start / Stop Rotator
Electric Control Package sold separately
- Model CP-456-1-115 for single-phase 115V 60Hz power supply
- Model CP-456-1-230 for single-phase 208V or 230V 60Hz power supply
Guard Enclosure Kit sold separately as Kit GEK-456-1

IMPORTANT: OSHA, CSA and EU require enclosure with safety interlock
Load upright drum at floor level with drum truck, or with below-hook drum lifter and your crane
Hydraulic Power-Tilt drum over onto roller wheels
Roll STEEL drum with 6" to 26" (15 to 66 cm) diameter, and maximum 40" (102 cm) length
- To roll a PLASTIC drum, add Option POLY-456
- To roll 1-to-5 gallon cylindrical can, install Idler Attachment 1-5-1
Maximum ambient operating temperature: 130°F (54°C)

	4939X-P Fully enclosed crate for export of two of 456 Series with NO GEK's. Heat treated and certified IPPC compliant.
	1-5-1 Idler Attachment to roll 1 to 5 gallon (20L) can on 456 or 1-5154 Series drum roller. Adjusts for can up to 18" (457mm) tall.
	CP-456-1-115 Control Package for model 456-1 Drum Roller. 1-Phase 115V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	CP-456-1-230 Control Package for model 456-1 Drum Roller. 1-Phase 230V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	GEK-456-1 Kit: Enclosure with Safety Interlock for CUSTOMER to install with 456 Series 1-Phase AC Drum Roller. Ships separately w/ 2nd freight bill.
	2848Xi-P Fully enclosed crate for export of 456 Series with NO GEK. Heat treated and certified IPPC compliant.
	4349-p KIT, SEAL, 3" CYL, 648-P DF
	5516Xi-P Fully enclosed crate for export of 456 with GEK (NOT set up). Crate is heat treated & certified IPPC compliant.
	6349-P KIT, SEAL, 6318-P, 6319-P
	FAT-456 OPTION: Complete Factory Acceptance Test form FFAT-456, and ship in literature packet with NEW 456 Series Drum Roller.
	POLY-456 OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. 4 Extra wheels and end stop. CANNOT order without drum roller.