Domande frequenti

Vi invitiamo a richiedere un preventivo. I nostri ingegneri hanno progettato attrezzature per fusti per molte applicazioni personalizzate e prenderanno in considerazione le richieste di nuove idee. I nostri reparti di ingegneria e di sviluppo di nuovi prodotti sono dotati della tecnologia necessaria per sviluppare, analizzare e collaudare apparecchiature di movimentazione dei fusti personalizzate.

I kit di ricambi consigliati sono disponibili per la maggior parte dei modelli attuali. Trovateli nella sezione Opzioni della pagina web relativa al vostro numero di modello.

Heavy drums should always be moved with proper drum equipment specifically designed for that purpose. Mishandling a heavy drum can cause serious injury, damage the drum, waste valuable contents or contaminate the environment. All employees who handle drums should be trained in proper procedures and use of drum equipment

The capacity of drum equipment for tilting a drum is reduced for a partially full drum due to the unbalanced and shifting load. A half-full drum is harder to tilt, and places more stress on the gearing and other components. The half-full rating of a drum handler indicates the capacity for tilting an unbalanced, bottom-heavy drum.

Sì, esistono attrezzature per carrelli elevatori per movimentare i fusti di cartone, detti anche fusti in fibra. Sono fatti di carta a strati e possono avere cerchi in metallo. Tuttavia, alcuni non hanno parti metalliche.

Per i movimentatori di fusti con sollevamento idraulico del fusto, è possibile scollegare il tubo dell'aria per lo spostamento. È sufficiente collegare il tubo dell'aria per sollevare o girare il fusto.

Tutti i prodotti Morse sono venduti attraverso la nostra rete mondiale di rivenditori.

Il vostro rivenditore Morse di fiducia può aiutarvi a soddisfare le vostre esigenze di attrezzature per fusti. Possono aiutarvi a scegliere il modello migliore per ogni applicazione di movimentazione dei fusti.

To release drum grip, hold down the RED safety button and press the grip "OPEN" button on the wired pendant. The grippers will NOT open by pressing only the grip "OPEN" button. The remote control also requires you to press both "OPEN" buttons at the same time.

Yes, the 290f can accept an optional grip pad kit attachment allowing it to handle plastic and fibre drums. The lids need to be on and secured. You can order the grip pad kit as option 6978i-p to have it installed on a new 290f or kit p/n 6978-p for field install on an existing 290f.

Yes, battery powered units do include both the battery and the charger.

Morse forklift attachments require 25" between forks.

No, under no circumstance should our battery powered units be used in a hazardous environment.

No, our battery powered units are not EE or EX rated and cannot be used in hazardous locations.

Email orders and POs, purchase orders, to orders@morsedrum.com.

Requests for quote should be emailed to inquiry@morsedrum.com. You can also fill out one of our RFQ, request for quote, forms on our website like this one https://morsedrum.com/faq.

Contact your local Morse dealer or Morse Manufacturing's Customer Service team to request a quote on replacement parts. The required part numbers and details can be found on the parts diagram associated with your Morse model. You can search for your specific parts diagram by model and serial number here https://morsedrum.com/parts-diagrams.

Visit our contact page here https://morsedrum.com/contact. There you can fill out a contact form and find our headquarters' address and phone number.

Our drum adapters allow our standard Morse drum handling equipment to also handle pails, buckets, drums or barrels down to a diameter of 14 inches. We also offer a range of models specifically designed for 5-gallon pails that suit a diameter range of 11 to 15 inches.

If you have a request or a unique need for product information, diagrams or models, please call our engineering team at (315) 437-8475.

You can find the parts diagrams for any Morse product in one of two ways. You can navigate to the model's unique product page, click on the "Downloads & Resources" tab and select the "Operators Manuals and Parts Diagrams" category to access current and past parts diagrams. Parts diagrams can also be found by visiting https://morsedrum.com/parts-diagrams and searching by model and serial number to find the corresponding parts diagram.

Lead time varies depending on the Morse drum handling equipment you are interested in ordering. To get that specific information, please get in touch with our customer service team at (315) 437-8475.

Morse Manufacturing sells through a network of dealers. In order to request a quote and be connected to the Morse dealer nearest you, you can either call our Customer Service team at (315) 437-8475 or email inquiry@morsedrum.com.

Avete bisogno di aiuto con i nostri prodotti? Fatecelo sapere!

icona del telefono+1 (315) 437-8475
icona e-mailinquiry@morsedrum.com

Progettato per raggiungere nuove vette

Offre la più ampia linea di prodotti nel settore della movimentazione dei fusti.

Contatto
contattaci