456-1
Morse Hydra-Lift Drum Rotators roll a drum on its side to mix drum contents
456
456 Hydra-lift Drum Rollers
Load upright drum with a drum truck
Load upright drum with your hoist and a below-hook drum lifter
Hydra-Lift Drum Rotators have hydraulic power tilt control to raise drum from upright and lay it down in rolling position.
Close the Enclosure to engage interlock. Then tilt over to horizontal drum rolling position.
Enclosure with safety interlock automatically shuts off the drum tumbler when the door is opened.
Option # POLY-456 Roll your 55-gallon plastic drum on a Hydra-Lift Drum Roller, adds extra wheels and an end stop to prevent your drum from traveling lengthways during rolling.
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Rodillo Hydra-Lift. Motor monofásico 115/230V 60Hz. REQUIERE controles para arrancar/parar. OSHA REQUIERE caja con enclavamiento.
456-1
- IMPORTANTE: OSHA, CSA y la UE exigen una caja con enclavamiento deseguridad Cargue el tambor vertical a nivel del suelo con una carretilla elevadora de tambores, o con un elevador de tambores con gancho inferior y su grúa Potencia hidráulica - Incline el tambor sobre las ruedas de rodillos Enrolle tambores de ACERO con un diámetro de 15 a 66 cm (6" a 26") y una longitud máxima de 102 cm (40")
- Para rodar un bidón de PLÁSTICO, añada la opción POLY-456
- Para rodar bidones cilíndricos de 1 a 5 galones, instale el accesorio de polea guía 1-5-1
- Temperatura ambiente máxima de funcionamiento 130°F (54°C)
General
| RPM de tambor | 5 to 17 RPM
RPM se basa en un tambor de 22,5" (57,15 cm) de diámetro. |
| Capacidad líquida | 1000 Lb. (454.00 kg) |
| Capacidad de carga seca | 400 Lb. (181.60 kg)
Una carga seca cambiante ejerce una mayor tensión en el rotador del tambor que el movimiento fluido de una carga líquida. |
Motor information
| Fase | 1 |
| HP | 1.00 |
| Estilo | TEFC (Totally enclosed fan cooled) |
| A prueba de explosiones | No |
| Frecuencia | 60Hz |
| Voltage / Amp draw | 115v / 12.8 |
| Voltage / Amp draw | 208v / 7.0 |
| Consumo de vsoltaje / amperios | 230v / 6.4 |
Dimensiones de envío
| Capacidad semi llena | 72" (182.88 cm) |
| Anchura del buque | 42" (106.68 cm) |
| Altura del buque | 46" (116.84 cm) |
| Peso del buque | 630 Lb. (286.02 kg) |
| Clase de buque | 70 |
Los números de serie de 4 dígitos son simplemente el mes y el año de fabricación. Ejemplo: 1120 es noviembre de 2020
|
4939X-P
Caja totalmente cerrada para la exportación de 2 de la serie 456. La caja está tratada térmicamente y certificada conforme a la IPPC. |
|
1-5-1
Idler Attachment to roll 1 to 5 gallon (20L) can on 456 or 1-5154 Series drum roller. Adjusts for can up to 18" (457mm) tall. |
|
CP-456-1-115
Control Package for model 456-1 Drum Roller. 1-Phase 115V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect. |
|
|
CP-456-1-230
Control Package for model 456-1 Drum Roller. 1-Phase 230V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect. |
|
GEK-456-1
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 456 Series 1-Phase AC Drum Roller. Ships separately w/ 2nd freight bill. |
| 2848Xi-P
Fully enclosed crate for export of 456 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
| 4349-p
KIT, SEAL, 3" CYL, 648-P DF |
|
| 5516Xi-P
Fully enclosed crate for export of 456 with GEK (NOT set up). Crate is heat treated & certified IPPC compliant. |
|
| 6349-P
KIT, SEAL, 6318-P, 6319-P |
|
| FAT-456
OPTION: Complete Factory Acceptance Test form FFAT-456, and ship in literature packet with NEW 456 Series Drum Roller. |
|
|
POLY-456
OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. 4 Extra wheels and end stop. CANNOT order without drum roller. |
Información de la Proposición 65 de California
Para obtener más información, visite www.P65Warnings.ca.gov
Opciones populares
View all options
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 456 Series 1-Phase AC Drum Roller. Ships separately w/ 2nd freight bill.
Control Package for model 456-1 Drum Roller. 1-Phase 115V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. 4 Extra wheels and end stop. CANNOT order without drum roller.
Idler Attachment to roll 1 to 5 gallon (20L) can on 456 or 1-5154 Series drum roller. Adjusts for can up to 18" (457mm) tall.
