Single-Stage MORStak Drum Racker

Single-Stage MORStak Drum Racker - Engage upright drum on floor

Single-Stage MORStak Drum Racker - Clamp upright drum on floor

MORStak Drum Racker - Unclamp horizontal drum for racking

Rack Configuration

Single-Stage MORStak Drum Racker - Setting drum onto drum roller

Electric Power Drum Lift and Tilt Controls

Model 611-110

MORStak Drum Racker. AC Power lift and tilt with 1-Phase 60Hz motor. Rack RIMMED 55-gallon (210L) steel or plastic drum to 56" (142 cm) high

All about Model 611-110

Specific to Model 611-110

Model 611-110 has single-phase 60Hz AC motor for power drum lift and tilt
Single-Stage Frame with maximum racking height of 56" (142 cm)
61" (155 cm) Turning Radius

All MORStak Drum Rackers - Rack Up to 8.5' High

SAFETY CONSCIOUS Drum Racker to eliminate dangerous bare fork drum handling
Rack a RIMMED 55-gallon (210 Liter) steel or plastic drums side-by-side with virtually zero clearance
Rack a drum in HORIZONTAL position
Rack drum with faucet in place
Has powered drum lift and tilt control

	1111i-p option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold.
	4173Xi-P Fully enclosed crate for export of 515, 525, 611 or 620 Series. Crate is heat treated and certified IPPC compliant.
	6659-P SEAL KIT FOR 1-1/2" CLYINDER
	6748-P KIT, SEAL, 2" CYL, 5522K-P
	FGO OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil
	LTC4 Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model.
	SCW-600 OPTION: Factory Installed static conductive wheels and casters on NEW 600 Series. Have conductive rubber tread.

Not available.

1Spec Sheet

1Recommended Spare Parts Kit

1Certificate of Compliance

22Operators Manuals and Parts Diagrams

Parts Diagram

Serial range

Base Assembly

271185 - Current

181180 - 271184

Drum Grab Assembly

229669 - Current

Hydraulic Lift Cylinder

0804 - Current

1002 - 0404

0000 - 0902

Hydraulic Power Pack

400000 - Current

1202 - 0222

0981 - 1102

Hydraulic Tilt Cylinder

409160 - Current

1021 - 0623

0413 - 0623

0902 - 0507

1290 - 0802

Yoke / Carriage Assembly

412238 - Current

271185 - 412237

262765 - 271184

229669 - 262764

181180 - 229668

Operators Manual

Hydraulic Pump

400000 - Current

MORStak Drum Racker

211428 - Current

181180 - 211427

1Material Safety data sheet

611 Video
Click to play

Specifications

Full capacity

800 Lb. (363.20 kg)

Proposition 65 warning WARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov