Morse model 525SS-T

All about Model 525SS-T

Model 525SS-T has manual hand pump drum lift and pull chain manual drum tilt
Frame is made of type 304 Stainless Steel with bead blast finish. Welds are NOT ground smooth or polished.
Dispense drum at up to 106" (269 cm) high
T-Type Scale: Intrinsically-Safe Electronics Ultra Low Power Intensity (ULPI) Instrument for use in many hazardous areas, approved for all classes, groups and divisions of N.E.C. hazardous environment classifications.
Charger for scale battery is NOT for use in hazard area. Recharge outside hazard area.
We recommend the MORStop^TM Tilt-Brake Option to automatically lock drum tilt angle

Mobile Scale-Equipped Drum Handler to Lift, Weigh, Transport and Dispense a drum
Weigh drum as you pour to dispense exact amount needed
Accuracy of +/- 0.2% of displayed weight
Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
MORCINCH^TM Drum Handling System
- Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCH^TM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum

	4173X-P Fully enclosed crate for export of 515, 525, 611 or 620 Series. Crate is heat treated and certified IPPC IPPC compliant.
	55/30SS-14.5 Stainless Steel Adapter for 14-14.5" (35.6-36.8 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.
	55/30SS-16 Stainless Steel Adapter for 15.5-16" (39.4-40.6 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.
	55/30SS-17.5 Stainless Steel Adapter for 17-17.5" (43.2-44.5 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum.
	55/30SS-19 Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum.
	55/30SS-20.5 Stainless Steel Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum. Measure diameter 1/2-way down drum.
	55/30SS-22 Stainless Steel Adapter for 21.5" to 22" (54.6 to 55.9 cm) diameter drum. Measure diameter 1/2-way down drum.
	55/30SS-19B Stainless Steel Diameter Adapter for 18.5"-19" Drum. Integrated brackets adjust to 38" tall drum. **Measure outside diameter 1/2-way down drum.
	55/30SS-32G Stainless Steel Diameter Adapter for 32-gallon Rubbermaid Brute model 2632
	55/30SS-44G Stainless Steel Diameter Adapter for 44-gallon Rubbermaid Brute model 2643
	2993i-P Replace 8" dia. front wheels with 5" dia. front wheels.
	3008SSI-P Option: Factory installed stainless steel hydraulic cylinder, 1.5" x 52", on new 520SS or 525SS series.
	4556SS-P Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler
	4560BSS-P KIT: Stainless steel MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30-55 gallon drum.
	5115ssi-p OPTION: Factory installed 2" x 3' Web Strap and Stainless Steel Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain around drum.
	5597SSI-P OPTION: Factory installed stainless steel ratchet and pawl on NEW stainless steel MORCINCH drum holder
	6388SS-P STAINLESS STEEL ADAPTOR FOR USE WITH 4556SS-P BRACKET ASSEMBLY IN ORDER TO HANDLE 55 GALLON RUBBERMAID MODEL 2655
	6659-P SEAL KIT FOR 1-1/2" CLYINDER
	93740-P Step Down Transformer for Battery Charger used with T-Type Scale Indicator. Required for 220V 50Hz application.
	96MK1939SSI-P OPTION: Factory Installed stainless steel hand pump on NEW drum handler
	CRC-525SS OPTION: Factory Installed corrosion resistant lift chains on NEW 525SS Series
	FGO OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil
	LTC4 Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model.
	SSC-500 OPTION: Factory Installed 6" diameter stainless steel swivel casters on NEW 500 Series Vertical-Lift Drum Pourer
	SSG-MT OPTION: Factory Installed stainless steel tilt gears and chain on NEW manual tilt 400 or 500 series. 800 Lb. capacity

Not available.

4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

2Spec Sheet

Spec Sheet

Serial range

500SS Series Stainless Steel Vertical-Lift Drum Pourers

Current

Stainless Steel Characteristics

Current

1Certificate of Compliance

11Operators Manuals and Parts Diagrams

Operators Manual

Serial range

Accessories - Stainless Steel MORCINCH Drum Holder

0209 - Current

CE Declaration of Conformity

400000 - Current

T Scale Package

306232 - Current

181180 - 306231

Parts Diagram

Serial range

Base Assembly

400000 - Current

Hydraulic Lift Cylinder

0504 - Current

1002 - 0404

0000 - 0902

MORCINCH Drum Holder

1210 - Current

OPTION: Stainless Steel Gears, Manual Tilt

1015 - Current

1210 - 0915

1Material Safety data sheet

Full capacity	363.20 kg (800 Lb.)
Half capacity	227.00 kg (500 Lb.) Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum.
Dispense height	269.24 cm (106.0")
Lift style	Manual lift
Tilt style	Manual tilt

Ship length	198.12 cm (78")
Ship width	121.92 cm (48")
Ship height	210.82 cm (83")
Ship weight	424.94 kg (936 Lb.)
Ship class	150

Model 525SS-T

Specifications

The specialist in drum handling equipment

Products

Company

Get in touch