Model 310-1-50

Tilt-To-Load Drum Tumbler. 1-Phase 220V 50Hz Motor. REQUIRES Controls Start/Stop. CE REQUIRES Enclosure with Safety Interlock.

Specifications

Drum RPM	4 to 16 RPM RPM is based on 22.5" (57.15 cm) diameter drum.
Full capacity	363.20 kg (800 Lb.)
Half capacity	181.60 kg (400 Lb.) Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum.

Motor Controls sold separately.

All about Model 310-1-50

Model 310-1-50 has single-phase 220V 50Hz motor
ONLY for country with 50Hz power supply
Adjust drum rotation from 4 to 16 RPM
REQUIRES Electric Control Box to Start / Stop Rotator
Electric Control Package sold separately
- Model CP-310-1-220-50 for single-phase 220V 50Hz power supply
Guard Enclosure with Interlock sold separately as Kit GEK-310-1

IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
Vigorous "Corner-Over-Corner" Drum Mixing
Easy Floor-Level Loading of Upright Drum. Then Tilt Drum Holder Up for Mixing.
Load upright drum...
- with drum truck
- with below-hook drum lifter and your hoist
Mixing inside a closed drum reduces hazards and worker exposure
Incorporate sediment and homogenize valuable ingredients
Avoid messy cleanup of insertion mixers
Mix contents of steel, plastic or fiber drum
- 29" to 37" (74 to 94 cm) tall
- 18" to 23.5" (46 to 60 cm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum

	CP-310-1-220-50 Control Package for model 310-1-50 Drum Tumbler. 1-Phase 220V 50Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	GEK-310-1 Kit: Enclosure with Safety Interlock for CUSTOMER to install with 310 1-PH AC Tilt-To-Load Drum Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
	3212Xi-P Fully enclosed crate for export of 310 Series with NO GEK. Heat treated and certified IPPC compliant.
	4963-P KIT, SEAL, 2" CYL, 4572-P DF
	5014I-P OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler
	5480Xi-P Fully enclosed crate for export of 310 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant.
	6589W-P Top hold down bar for drum holder 5801-P used on 309, 310 and 311 Series Drum Tumblers.
	6637I-P OPTION: Factory Installed cinch chain on drum holder 5801-p used on 309, 310 & 311 drum tumblers. Replaces ratchet web strap.
	FAT-310 OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler.