Below-Hook Drum Lifting Hook ONLY for horizontal 55-gallon (210 liter) steel drum


Specific to model 41...
  • Model 41 is ONLY to lift a horizontal 55-gallon (210 liter) steel drum with your hoist or crane
  • WARNING: Do NOT attempt to lift an upright drum with this device
  • Every unit is individually load tested at the factory at 125% of rated capacity, and ships with load test certificate
All Drum Lifters...
  • Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
    • Rated load markings and unit identification
    • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
    • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
    • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1


Full Capacity1000 Lb. (454 kg)

Shipping dimensions

Ship length20" (50.8 cm)
Ship width5" (12.7 cm)
Ship height4" (10.16 cm)
Ship weight5 Lb. (2.27 kg)
Ship class60
4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

No options available.

California Proposition 65 Information

WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov