Model 7SS-17

Stainless Steel Clamp Collar to Secure Drum Cone to Drum Top. Fits 17-3/8" (44.1 cm) drum rim outside diameter with drum lid removed.

All about Model 7SS-17
Specific to Model 7SS-17
  • Made of bead blast finished Type 304 Stainless Steel
  • Clamp Collar secures Drum Cone to drum
  • Fits 17-3/8" (44.1 cm) drum rim outside diameter
  • IMPORTANT: Remove drum lid. Then measure drum top rim outside diameter WITHOUT lid.
  • Tighten Clamp Collar around top rim of drum with Cone in place
  • Tighten Clamp Collar by turning knob on end of threaded rod
  • On inside of Clamp Collar, sections of rod retain Cone, and sections of angle engage under top rim of drum
All Drum Cones
  • Replace your drum lid with a drum cone
  • Control dumping of DRY MATERIAL from a drum
  • Greatly reduce dust when discharging dry material
  • Extend the reach of pour
  • Install either a slide gate or an iris valve with 6" (15.24 cm) opening to start and stop dispensing
  • Drum cones work with a steel drum or a fiber drum
  • Drum Cone capacity exceeds the capacity of all Morse drum handlers when properly secured to drum with correct size Morse Clamp Collar
  • IMPORTANT: Determine the Correct Size Drum Cone and Clamp Collar
    1. Remove drum lid BEFORE measuring
    2. Measure drum OUTSIDE diameter across Top Rim WITHOUT drum lid

No options available.

Not available.
sticky note 4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

Specifications

Proposition 65 warningWARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ship length 25" (63.50 cm)
Ship width 25" (63.50 cm)
Ship height 5" (12.70 cm)
Ship weight 10 Lb. (4.54 kg)
Ship class 85