Part XT

Extension Tube Kit. 5" (12.7 cm) long with 6" (15.24 cm) diameter. CUSTOMER to install ONLY on Iris Valve or Drum Cone valve flange.

All about Part XT
Specific to Part XT
  • Extends dispensing reach of Drum Cone
  • Extension Tube installs ONLY onto Iris Valve,
    or directly onto Drum Cone Valve Flange
  • CANNOT be installed on Slide Gate
All Drum Cones
  • Replace your drum lid with a drum cone
  • Control dumping of DRY MATERIAL from a drum
  • Greatly reduce dust when discharging dry material
  • Extend the reach of pour
  • Install either a slide gate or an iris valve with 6" (15.24 cm) opening to start and stop dispensing
  • Drum cones work with a steel drum or a fiber drum
  • Drum Cone capacity exceeds the capacity of all Morse drum handlers when properly secured to drum with correct size Morse Clamp Collar
  • IMPORTANT: Determine the Correct Size Drum Cone and Clamp Collar
    1. Remove drum lid BEFORE measuring
    2. Measure drum OUTSIDE diameter across Top Rim WITHOUT drum lid

No options available.

Not available.
sticky note 4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020
1Spec Sheet
Operators Manual and Parts Diagram
Serial range
Kit IV plus XT - Install Iris Valve PLUS Extension Tube
edit icon0000 - Current
Kit XT - Extension Tube Installation
edit icon0000 - Current

No videos available.

Specifications

Proposition 65 warningWARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ship length 16" (40.64 cm)
Ship width 12" (30.48 cm)
Ship height 17" (43.18 cm)
Ship weight 5 Lb. (2.27 kg)
Ship class 85