Omni-Lift Drum Rackers - Rack Up to 6' High

Morse Omni-Lift Drum Rackers lift, move, and place a drum horizontally in a rack. Morse Omni-Lift Karriers (Patented).


Key features

  • Rack a drum up to 72" (183 cm) high
  • Rack a RIMMED 55-gallon (210 liter) drum
  • Lift a drum from either horizontal or vertical position on the floor
  • Models with Battery, AIR or Electric Power Drum Lift and Tilt Control
  • Manual Lift and Tilt Models
  • Manual and air powered models with spark resistant parts also available
  • Handle drum with up to a 10" (25.4 cm) long drum faucet in place
  • Capacity:
    • 800 Lb. (363 kg) full drum
    • 500 Lb. (227 kg) half-full unbalanced, bottom-heavy drum

Request Quote Model Chart


Omni-LiftTM Drum Rackers enable racking a drum up to 72" (183 cm) high. They are easily handled by one person. Lift a drum from either horizontal or vertical position on the floor. The Omni-Lift Drum Racker will accommodate a drum faucet that extends up to 10" from the drum. Models with ergonomic battery, air or plug-in electric Power Drum Lift and Tilt Control. Fully manual lift and tilt models also available. Manual and air powered models available with spark resistant parts. Steps to Rack a Drum
  1. Secure upright drum in holder with web strap and ratchet
  2. Lift drum
  3. Tilt drum to horizontal
  4. Release web strap
  5. Transport drum to rack, then raise drum
  6. Rack drum in horizontal position
Handle a 55-gallon (210 liter) drum with a drum faucet in place, allowing your drum rack to serve as a dispensing station. Rack a RIMMED 55-gallon (210 liter) steel drum in horizontal position. To Rack a RIMMED 55-Gallon (210 liter) PLASTIC Drum install Drum Pad Kit # 3313-P. This kit provides pads to support the flexible sidewalls of a plastic drum. The drum must have suitable top rim for chine catches to engage. NOTE: Models with spark resistant parts already include spark resistant Poly Drum Pad Kit. Clearance for 8" front wheels is required under the lowest shelf. Drum cradles on rack must be no wider than 16” (40.6 cm) for steel drum, or no wider than 11” (28 cm) for a plastic drum. You can also place a horizontal 55-gallon (210 liter) steel drum onto the open end of a Morse Stationary Drum Roller, or onto a Portable Drum Roller (except when equipped with accessory # 3313-P). NOTE: Morse does NOT make or sell drum racks. We manufacture the Drum Racker.
Morse Omni-Lift Drum racker
Models with Power Drum Lift and Tilt
  • Model 405-115 with Battery Power Lift and Tilt
  • Model 405-114 with AIR Power Lift and Tilt
  • Model 405-110 with plug-in Electric Power Lift and Tilt with single-phase 60Hz motor
  • Model 405-111 with plug-in Electric Power Lift and Tilt with explosion-proof single-phase 60Hz motor
  • Model 405-112 with plug-in Electric Power Lift and Tilt with explosion-proof 3-phase 60Hz motor
  • Model 405-113 with plug-in Electric Power Lift and Tilt with 3-phase 60Hz motor
  • Model 405-117 with plug-in Electric Power Lift and Tilt with single-phase 50Hz motor ONLY for use in countries with 50Hz power supply
Models with Power Drum Lift, but Manual Drum Tilt
  • Model 405-125 with Battery Power Lift and Manual Hand Crank Tilt
  • Model 405-124 with AIR Power Lift and manual Hand Crank Tilt
  • Model 405-120 with plug-in Electric Power Lift with single-phase 60Hz motor, and Manual Hand Crank Tilt
  • Model 405-121 with plug-in Electric Power Lift with explosion-proof single-phase 60Hz motor, and Hand Crank Drum Tilt
  • Model 405-122 with plug-in Electric Power Lift with explosion-proof 3-phase 60Hz motor, and Hand Crank Drum Tilt
  • Model 405-123 with plug-in Electric Power Lift with 3-phase 60Hz motor, and Hand Crank Drum Tilt
  • Model 405-127 with plug-in Electric Power Lift with single-phase 50Hz motor ONLY for use in countries with 50Hz power supply, and Hand Crank Drum Tilt
Model with Manual Drum Lift and Tilt
Drum Pad Kit REQUIRED for a RIMMED 55-Gallon (210 liter) Plastic Drum
Kit REQUIRED for Plastic Drum
  • Kit 3313-P Drum Pad Kit to support soft sided plastic drum. ONLY for RIMMED 55-gallon (210 liter) plastic drum. NOTE: Models with spark resistant parts below already include Drum Pad Kit.
Models with Spark Resistant parts
  • Model 405M-114 with AIR Power Lift and Tilt
  • Model 405M-124 with AIR Power Lift and Manual Hand Crank Tilt
  • Model 405M with Manual Hand Pump Lift and Hand Crank Tilt
  • Model 405M-111 plug-in Electric Power Lift and Tilt with explosion-proof single-phase 60Hz AC motor
  • Model 405M-121 plug-in Electric Power Lift with explosion-proof single-phase 60Hz AC motor and Manual Hand Crank Tilt

Model Chart

Product Description
405 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Hand pump drum lift, and hand crank drum tilt.
405-110 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Single-phase 60Hz electric power lift and tilt.
405-111 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Explosion-proof single-phase 60Hz electric power lift and tilt.
405-113 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. 3-phase 60Hz electric power lift and tilt.
405-114 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. AIR power lift and tilt.
405-115 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. 12V Battery power lift and tilt.
405-117 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. Has single-phase 50Hz electric power lift and tilt.
405-120 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Single-phase 60Hz electric power lift, and hand crank drum tilt.
405-121 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Explosion-proof single-phase 60Hz electric power lift. Hand crank drum tilt.
405-123 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. 3-phase 60Hz electric power lift, and hand crank drum tilt.
405-124 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. AIR power lift and hand crank drum tilt.
405-125 Omni-Lift Karrier Drum Racker to lift, move, and rack drum horizontally. 12V Battery power lift, and hand crank drum tilt.
405-127 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. Single-phase 50Hz electric power lift, and hand crank drum tilt.
405M Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Hand pump lift and hand crank drum tilt.
405M-111 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. Explosion-proof single-phase 60Hz electric power lift & tilt.
405M-114 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. AIR power lift and tilt.
405M-121 Omni-Lift Karrier Drum Racker to lift, move, and place drum horizontally on rack. Explosion-proof single-phase 60Hz electric power lift, & hand crank tilt.
405M-124 Omni-Lift Karrier Drum Racker to lift, move and place drum horizontally on rack. AIR power drum lift, and hand crank drum tilt.

California Proposition 65 Information


...
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov