morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Drum Lifting Hooks for Horizontal Steel Drum

Morse model 41 - Drum Lifting Hook
Morse model 41
Drum Lifting Hook
  • Lift a horizontal drum with your hoist or crane

  • ONLY for horizontal 55-gallon (210 liter) steel drum

  • Capacity: 1,000 Lb. (454 kg)

How to select the correct drum lifter

41  -  Drum Lifting Hooks for Horizontal Drum ONLY

steel drum

Drum Lifter Video
Morse Below-Hook Drum Lifter Video

Drum Lifting Hook - Morse Model 41
Model 41 Drum
Lifting Hook

55-Gallon drum hoist

These Drum Lifting Hooks are used to lift a horizontal 55-gallon (210 liter) steel drum, 34" to 36" (86 to 92 cm) long. They add 10.6" (27 cm) to the height of your apparatus when lifting a horizontal drum (measured from the drum rim to the inside top of the lifting eye).

Capacity: 1,000 Lb (454 kg)

WARNING: Do NOT attempt to lift an upright drum with this device.

Model 41 Drum Lifting Hook has an alloy steel lifting ring, steel rods, and malleable iron hooks.

Model 41M horizontal drum lifter is similar to model 41, but has spark resistant parts

  • Rods are stainless steel
  • Lifting ring and hooks are spark resistant aluminum/bronze alloy

Model 41M Drum Lifting Hook with Spark Resistant Parts
Model 41M Drum Lifting Hook
with Spark Resistant Parts

Use drum truck to position drum horizontally for lifting
Position drum horizontally with
4-Wheel Drum truck for lifting

Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co., Inc. in Syracuse, NY 13208 U.S.A.

Note about Load Test and Certificate
IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

See Load Test Video

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
Model # Description Capacity Domestic
Ship Weight
Domestic
Ship Dimensions
41 Drum Lifting Hook 1,000 Lb. (454 kg) 5 Lb. (2.3 kg) L20" W5" H4" (51 x 13 x 10 cm)
41M Drum Lifting Hook with Spark Resistant Parts 1,000 Lb. (454 kg) 6 Lb. (2.7) L20" W5" H4" (51 x 13 x 10 cm)

Last Updated: 08/21/19

Morse 41 Series Drum Lifting Hooks for a 55-gallon (210 liter) horizontal steel drum ONLY.

 
California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov