morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Pour a drum with your hoist or crane with Morse Extra Heavy-Duty Below-Hook Drum Carrier
Model 185A-GR
Extra Heavy-Duty drum pourer for 55-gallon steel drum up to 2,000 Lb. (907 kg)

Morse model 185A-GR 2000 Lb. Below Hook Drum Carrier

Extra Heavy-Duty Below-Hook Drum Carrier
with 2000 Lb. (907 kg) Capacity

Morse Model # 185A-GR

Use Morse Extra Heavy-Duty Kontrol-Karrier to lift, rotate and control drum pouring.

Morse Extra Heavy-Duty below-hook drum carrier enables you to pour a drum above your reach. You control drum tilting 360o in either direction. Dispense drum contents with your hoist. Even lift and invert a drum with drum faucet in place.




Model 185A-GR has two web straps and ratchets to secure drum in the drum holder.

This Extra Heavy-Duty drum carrier has a pull chain to control the drum tilt with a 150:1 enclosed worm gear speed reducer and "extra heavy-duty" rating.

Secure drum in model 185A-GR Below Hook Drum Handler with 2 web straps and ratchets
Secure drum in model 185A-GR Below Hook Drum Handler with 2 web straps and ratchets

Capacity:

  • 2000 Lb. (907 kg) Full 55-gallon steel drum
  • 1000 Lb. (454 kg) Half-full drum
    Half-Full Drum Rating is an indication of capacity for tilting an unbalanced, bottom-heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than full drum.
Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co., Inc. in Syracuse, NY 13208 U.S.A.

Note about Load Test and Certificate
IMPORTANT:  Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

See Load Test Video

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
  • All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
Options
Option # 6214i-P (Factory Installed)
Option 6149i-P 2 Load Binders to secure drum
Two Load Binders to secure drum.
Replaces two web straps.
Option X03-185GR (with new unit)
10" hand Wheel to turn drum
16" Hand Wheel to turn drum
 
Accessories
Diameter Adaptor # 55/30-19GR
Diameter Adaptor for 19" diameter steel drum
Diameter Adaptor for 19" diameter steel drum
Asymmetric Drum Cones
Asymmetric Drum Cone with slide gate valve - Morse model # 5-SG-90-23
Use asymmetric drum cone with valve to
control pouring with below-hook drum carrier
 
Model # Description Handle Domestic
Ship Weight
Domestic
Ship Dimensions
185A-GR 2 ratchets and straps Steel 55-gallon
(210 liter) drum
177 Lb.
(80.3 kg)
L42" W42" H15"
(107 x 107 x 38 cm)
 
Options and
Accessories
Description Domestic
Ship Weight
Domestic
Ship Dimensions
6214i-P Factory Installed Load Binders to secure drum   - -
6214KIT-P Kit to convert web straps to two load binders to secure drum    
X03-185GR 16" Hand Wheel to turn drum -12 Lb.
(-5.4 kg)
- -
55/30-19GR Diameter Adaptor for 19" diameter steel drum 38 Lb.
(17 kg)
L31" W26" H11"
(79 x 66 x 28 cm)
5-VF-90-23 Asymmetric Drum Cone for 55-gallon (210 liter) steel drum 30 Lb.
(13.6 kg)
L28" x W19" x H30"
(71 x 48 x 76 cm)
7-23 Clamp Collar to secure 5-VF-90-23 to drum 10 Lb.
(4.5 kg)
L25" x W25" x H5"
(64 x 64 x 13 cm)
5-VF-90-19 Asymmetric Drum Cone for 30-gallon (114 liter) steel drum 30 Lb.
(13.6 kg)
L28" x W19" x H30"
(71 x 48 x 76 cm)
7-19 Clamp Collar to secure 5-VF-90-19 to drum 10 Lb.
(4.5 kg)
L25" x W25" x H5"
(64 x 64 x 13 cm)
SG Slide Gate Valve to control material flow from drum 5 Lb.
(2.3 kg)
L16" x W12" x H17"
(41 x 31 x 43 cm)
IV Iris Valve to control material flow from drum 10 Lb.
(4.5 kg)
L10" x W10" x H4"
(25.4 x 25.4 x 10 cm)
 
Morse below-the-hook drum lifters

Important noteIMPORTANT - It is critical to use the correct holder and accessory to lift your drum type and dimensions.

Morse below-the-hook drum lifters are manufactured by Morse Mfg. Co., Inc. in East Syracuse, NY 13057. These drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

  • Rated load markings and unit identification
  • Minimum design safety factor of 3, based on yield strength, for load bearing structural components
  • Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
Last Updated: 06/14/19

 

Extra Heavy-Duty drum carrier with 2000 Lb. (907 kg) capacity to tilt and pour drum below-the-hook with your hoist or crane - Morse Kontrol-Karriers. More than just a drum inverter or drum dumper... below the hook drum carriers for controlled drum dispensing.

 
California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov