Drum Faucets

Drum Faucets / Drum Spigots to control the flow of liquid from your drums.


Key features

  • Drum faucets are available for standard 2" and 3/4" bung sizes (5.1 and 1.9 cm bung diameters) on 30 and 55-gallon (114 and 210 liter) steel drums
  • 1" (2.54 cm) Molasses Gate also available
  • Start, stop or adjust the flow while you dispense from a drum
  • Order a faucet compatible with the liquid you are dispensing
  • Polyethylene drum faucets and "Molasses Gate" drum faucets available
  • Morse drum faucets are NOT considered "food grade"

Request Quote Model Chart



Drum faucets / drum spigots are available for standard 2" and 3/4" bung sizes (5.1 and 1.9 cm bung diameters) on 30 and 55-gallon (114 and 210 liter) steel drums. They allow you to start, stop or adjust the flow while you dispense from a drum. Order a drum faucet compatible with the liquid you are dispensing.

NOTE: The bung on your PLASTIC drum may have more coarse "buttress thread," which requires an adaptor to accept the pipe thread on Morse drum faucets.

Morse drum faucets are NOT considered "food grade."

Morse model 68-20 and 68-75 Poly Drum Faucets are made with all polyethylene construction. Polyethylene drum faucets are ideal for use with non-flammable, corrosive liquids which are often packed in polyethylene drums. These drum faucets only require a quarter-turn for instant opening or closing. They stay open to empty the drum until manually closed.

"Molasses Gate" drum faucets are for viscous liquids. They are made of gray iron and have a brass sliding plate. These drum faucets are lockable with a padlock. They are NOT self-closing and NOT for use with flammable liquids. "Molasses Gate" refers to the viscosity of molasses. These faucets are NOT considered "food grade."



Model 68-20 2

Model 68-20
For a 2" (5.1 cm) bung with National Pipe Thread (NPT). It is intended for thick, viscous liquids (or larger-volume flow of thin liquids). It has a 2" (5.1 cm) EPDM gasket. The dispensing O.D. is 2-1/4" (5.72 cm). The dispensing I.D. is 2" (5.1 cm).



Model 68-75 3/4

Model 68-75
For a 3/4" (1.9 cm) pipe thread size bung. It is intended for thin liquids. The dispensing O.D. tapers from 7/8" to 3/4" at discharge end. The dispensing I.D. is 0.61".



Model 65-20 2

Model 65-20
Molasses Gate drum faucet for 2" (5.1 cm) bung with National Pipe Thread (NPT). It is for use with room temperature liquids. It will handle liquids up to a maximum of 130o F (54o C).



Model 65-75 3/4

Model 65-75
Molasses Gate drum faucet is for a 3/4" (1.9 cm) bung with National Pipe Thread (NPT). It is for use with room temperature liquids. It will handle liquids up to a maximum of 130o F (54o C).



Model 65-10 1

Model 65-10
Molasses Gate drum faucet is for a 1" (2.54 cm) bung with National Pipe Thread (NPT). It is for use with room temperature liquids. It will handle liquids up to a maximum of 130o F (54o C).


Model chart

Product Description
65-20 Molasses Gate Drum Faucet made of gray iron with lockable brass sliding plate. Fits 2" (5 cm) bung with NPT. Use for viscous liquids. This faucet is NOT self-closing, and NOT for use with flammable liquids.
65-75 .75" (1.9 cm) Molasses Gate Drum Faucet made of gray iron with lockable brass sliding plate. Fits .75" bung with NPT. Use for viscous liquids. This faucet is NOT self-closing, and NOT for use with flammable liquids.
68-20 Plastic Drum Faucet made of polyethylene. Fits 2" (5 cm) bung with NPT. Use for non-flammable liquids. This faucet is NOT self-closing, and NOT for use with flammable liquids.
68-75 3/4" Plastic Drum Faucet shown in open position. Made of polyethylene.

California Proposition 65 Information


...
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov