Pail Heaters

Electric Pail / Bucket Heaters with 4" (10.2 cm) wide pail heater band. Heat contents of a steel can quicker with 550 watt heater. Plastic pail heater is 150 watt.


Key features

  • Can Heaters / Bucket Warmers to heat contents of a 5-gallon (19 liter) steel or plastic pail / can / bucket
  • Has adjustable thermostat for temperature control
  • Flexible and efficient
  • Easy to clean and store
  • Moisture and chemical resistant
  • Durable for long-term use in industrial environments
  • Melt or preheat process ingredients
  • Control viscosity
  • Protect against freezing

Request Quote Model Chart



Morse flexible band heaters provide a simple, effective and reliable way to heat the contents of a steel can or plastic pail. Select the correct heater for your 5-Gallon (19 liter) plastic pail, metal can or bucket.

Morse PailPRO TM 5-Gallon Pail Heaters conduct heat through the can sidewall to product inside with a 4" (10.2 cm) wide flexible heater band. The band is made of tough, long lasting, fiberglass reinforced silicone rubber. They are easy to keep clean, as few chemicals will stick to silicone rubber.

Band Heaters for a Metal DrumIMPORTANT: Ensure heater is properly positioned completely BELOW fluid content level inside the container. Failure to do so can irreparably damage the pail heater.

Typical applications for electric pail heaters include: chemicals, oils, greases, fats, molasses, adhesives, plastics, mastics, resins, syrups, and a variety of liquid food products; maintain liquid temperatures in water purification systems; raise and maintain temperature during biodiesel production; maintain liquid resin at optimum temperature; maintain viscosity of chemical binder in sand casting mold operation.

115V pail heaters are equipped with six-foot cord and plug. 230V pail heaters have a six-foot cord... customer supplies the plug. A built-in metal screen is grounded electrically for safety.

Heaters for metal cans operate at higher temperatures and, therefore, work faster. Heaters for a plastic pail have lower temperature range.

Adjust thermostat to automatically maintain correct temperature. Thermostat allows you to raise the temperature of product in drum, then maintain that temperature +/-10 degrees F.
  • Heaters for metal drum heat with a 550 watt band. Adjust thermostat from 50o to 425o F (10o to 218o C).
  • Heaters for a plastic pail / bucket warmers heat with a 150 watt band. Adjust thermostat from 50o to 160o F (10o to 71o C).
Attach heater around your pail with simple spring and hook. The pliable heater conforms to pail sidewall and assures thorough band contact for effective heat transfer through the sidewall to contents inside.

Use a Morse PailPRO TM Electric Pail Heater to:
  • Heat contents to required temperature
  • Melt or preheat process ingredients
  • Control viscosity for handling processes
  • Protect against freezing
  • Speed flow of liquids
  • Promote dissolution and reduce residue
  • Speed chemical action

  • CAUTION: Morse pail heaters are NOT for use with "flammables"
  • Do NOT use in explosion hazard areas
  • CAUTION: It is the user's responsibility to ensure heaters is in full contact with the pail BELOW level of liquid in container. Failure to do so can irreparably damage the heater.
  • Do NOT bend a heater band sharply, as this may cause internal damage to the heating element
  • Open pail top to allow for expansion of contents when heating
  • All applications require temperature monitoring for safety and accurate results while using a can heater
  • CAUTION: Do NOT use Heater designed for a Metal Can on a plastic pail.



PailPRO TM Heaters for a Metal Can have 50o to 425oF (10 to 218 C) thermostat. CAUTION: Do NOT use on a Plastic or Fiber Pail



Band Heaters for a Metal Can

Model 710-5-115 115V 50/60Hz 550 Watt heater for a 5-gallon (19 liter) can. Fits 11.25" +/- 1" (28.6 cm +/- 2.54 cm) diameter.
Model 710-5-230 230V 50/60Hz 550 Watt heater for a 5-gallon (19 liter) can. Fits 11.25" +/- 1" (28.6 cm +/- 2.54 cm) diameter.



PailPRO TM Heaters / Bucket Warmers for a Plastic Pail have 50o to 160oF (10 to 71 C) thermostat. Can also be used on a Metal Can



Band Heaters / Bucket Warmers for a Plastic Pail

Model 711-5-115 115V 50/60Hz 150 Watt heater for 5-gallon (19 liter) pail. Fits 11.25" +/- 1" (28.6 cm +/- 2.54 cm) diameter.
Model 711-5-230 230V 50/60Hz 150 Watt heater for 5-gallon (19 liter) pail. Fits 11.25" +/- 1" (28.6 cm +/- 2.54 cm) diameter.


Model chart

Product Description
710-5-115 550 Watt Drum Heater for 5-gallon (20 liter) metal can, 115V 50/60Hz.
710-5-230 550 Watt Drum Heater for 5-gallon (20 liter) metal can, 230V 50/60Hz.
711-5-115 150 Watt Pail Heater for 5-gallon (20 liter) plastic or metal pail, 115V 50/60Hz.
711-5-230 150 Watt Pail Heater for 5-gallon (20 liter) plastic or metal pail, 230V 50/60Hz.

California Proposition 65 Information


...
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov