309-A
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Single Drum Tumbler. Air Power. Includes Air Controls and FRL. OSHA, CSA and CE REQUIRES Enclosure with Safety Interlock.
309-A
- Model 309-A is AIR powered
- Rotates drum at 14 RPM
- Vary RPM with air flow and pressure
- Includes AIR Controls, Filter, Regulator and Lubricator
- Requires plant air at 40 PSI at a rate of 40 SCFM
- Guard Enclosure Kit sold separately as model GEK-309-A
- IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
- Mixing contents of a closed drum reduces hazards and worker exposure
- Prevent messy cleanup of insertion mixers
- Incorporate sediment and homogenize stratified valuable ingredients
- Lift upright drum to load into tumbler with:
- Your hoist and model 92 Below-Hook Drum Lifter
- Your forklift, model 284 Fork Hook and model 92 Below-Hook Drum Lifter
- Mix products inside a closed steel, plastic or fiber drum
- 29" to 37" (74 to 94 cm) tall
- 18" to 23.5" (46 to 60 cm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum
General
Drum RPM | 14 RPM Vary RPM with air flow and pressure RPM is based on 22.5" (57.15 cm) diameter drum. |
Full Capacity | 800 Lb. (363.2 kg) |
Half-full Capacity | 400 Lb. (181.6 kg) Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
Shipping information
Ship length | 72" (182.88 cm) |
Ship width | 42" (106.68 cm) |
Ship height | 46" (116.84 cm) |
Ship weight | 638 Lb. (289.652 kg) |
Ship class | 150 |
Example: 1120 is November 2020
5979X-P Fully enclosed crate for export of 309 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
5980X-P Fully enclosed crate for export of 309 or 305 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant. |
|
GEK-309-A Kit: Enclosure with Safety Interlock for CUSTOMER to install with 309-A AIR Powered Single Drum Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL |
|
6589W-P Top hold down bar for drum holder 5801-p used on 309, 310 and 311 series drum tumblers. |
|
6637I-P Factory Installed Cinch Chain OPTION |
|
FAT-309 OPTION: Factory Acceptance Test form FAT-309 |
|
k208-p Air Motor Service Kit for 290-A-2P |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov