42-G
This product has been superseded by the 42.
Galvanized Below-Hook Heavy-Duty Drum Lifter
Below-Hook Heavy-Duty Drum Lifter with galvanized finish. ONLY for a 55-gallon (210 liter) steel drum. Capacity: 2000 Lb. (907 kg)
42-G
Specific to model 42-G...
- Below-Hook Heavy-Duty Drum Lifter with galvanized finish
- Lift a steel drum with your hoist or crane
- ONLY for a 55-gallon (210 liter) steel drum
- Two Lifting Modes: 1) Horizontal mode 2) Off-Vertical model enables you to upend, and set a drum down on its side
- Every one is independently load tested at the factory at 200% of rated capacity
- Ships with load test certificate
- Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
- Rated load markings and unit identification
- Minimum design safety factor of 3, based on yield strength, for load bearing structural components
- Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
- All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
General
| Full Capacity | 2000 Lb. (908 kg) |
Shipping dimensions
| Ship length | 26" (66.04 cm) |
| Ship width | 5" (12.7 cm) |
| Ship height | 4" (10.16 cm) |
| Ship weight | 9 Lb. (4.086 kg) |
| Ship class | 60 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
Spec SheetClick a serial range to download.
Document
Serial range
42 Series Drum Lifter
Operators Manual
Operators Manual
No options available.
California Proposition 65 Information
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
For more information go to www.P65Warnings.ca.gov