86S-2D
Below-Hook Two Drum Lifter with under drum supports
86S-2D
- Positive grip around each drums
- Holds drum in upright position... has NO tilt function
- 2000 Lb. Capacity (1000 Lb. per drum)
- Morse Below-Hook Drum Lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
- Rated load markings and unit identification
- Minimum design safety factor of 3, based on yield strength, for load bearing structural components
- Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
- All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1
General
Full Capacity | 2000 Lb. (908 kg) |
Shipping dimensions
Ship length | 48" (121.92 cm) |
Ship width | 40" (101.6 cm) |
Ship height | 57" (144.78 cm) |
Ship weight | 180 Lb. (81.72 kg) |
Ship class | 77.5 |
Example: 1120 is November 2020
Operators Manual
![]() |
55/30-14.5 Diameter Adapter for 14" to 14.5" (35.6 to 36.8 cm) diameter drum.IMPORTANT: Measure outside diameter half-way down drum, where adapter will engage. |
![]() |
55/30-16 Diameter Adapter for 15.5" to 16" (39.4 to 40.6 cm) diameter drum.IMPORTANT: Measure outside diameter half-way down drum, where adapter will engage. |
![]() |
55/30-17.5 Diameter Adapter for 17" to 17.5" (43.2 to 44.5 cm) diameter drum.IMPORTANT: Measure outside diameter half-way down drum, where adapter will engage. |
![]() |
55/30-19 Diameter Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum.IMPORTANT: Measure outside diameter half-way down drum, where adapter will engage. |
![]() |
55/30-20.5 Diameter Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum.IMPORTANT: Measure outside diameter half-way down drum, where adapter will engage. |
![]() |
55/30-22 Diameter Adapter for 21.5" to 22" (54.6 to 55.9 cm) diameter drum.IMPORTANT: Measure outside diameter half-way down drum, where adapter will engage. |
California Proposition 65 Information

For more information go to www.P65Warnings.ca.gov