morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029
 

Images of Morse Custom Hydra-Lift Drum Rollers / Drum Turners

Custom Hydra-Lift Drum Rotators  

Hydra-Lift
Drum Rollers

Custom Stainless Steel Hydra-Lift Drum Roller
Custom Hydra-Lift Drum Roller made of stainless steel
Custom Hydra-Lift Drum Roller made of type 304 stainless steel

OSHA Requires Enclosure with Safety Interlock

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

product page


Morse Custom Hydra-Lift Drum Rollers


Last Updated: 03/13/19

 
California Proposition 65 Information
warning iconWARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov