Drum Karriers to Lift and Pour Within Reach

Use Morse 85 Series Below-hook drum carriers to lift, rotate and control drum pouring within your reach. Turn drum by hand 360^o in either direction. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place.

You manually control drum tilting 360 degrees in either direction. These drum carriers require that you manually grasp the drum to control the drum tilt. The drum carrier can be locked with drum in vertical position for transporting, or locked in horizontal position to pour. 85i, 85i-SS, and 85G models can also be locked at 45 degrees to pour. Release tilt-locks on drum carrier for hand-controlled tilt at any angle.

Morse 85 Series Below-Hook Drum Carriers have an 800 Lb. (363 kg) full drum capacity, and a 500 Lb. (227 kg) half-full drum capacity. Half-Full Drum Rating is an indication of capacity for tilting an unbalanced, bottom-heavy drum. Partially full drum with an unbalanced and shifting load is harder to tilt than a full drum.

IMPORTANT: It is critical to use the correct holder and accessory to lift your drum type and dimensions.

IMPORTANT: Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.

Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:

• Rated load markings and unit identification
• Minimum design safety factor of 3, based on yield strength, for load bearing structural components
• Welding is performed by certified welders who have passed the ANSI/AWS D14.1 welding qualification test
• All welding is in accordance with ANSI/AWS D14.1 and ASME BTH-1

Model 85i
Handles a 55-gallon (210 liter) steel drum. Grasp drum and turn by hand. Lock drum at 45 degrees, as well as upright or horizontal.

Install a MORCINCH^TM Kit for a plastic drum. Insert correct size Diameter Adapter for a smaller drum.

Model 85i has a Web Strap and Ratchet to secure the drum. Factory installed Cinch Chain and Ratchet Option is available.

Model 85i-SS
Stainless Steel Below-Hook Carrier for a 55-gallon (210 liter) steel drum. Made of type 304 stainless steel. Welds are not ground smooth nor polished. Grasp drum and turn by hand. Lock drum at 45 degrees, as well as upright or horizontal.

Install a MORCINCH^TM Kit for a plastic drum. Insert correct size Diameter Adapter for a smaller drum.

Model 85i-SS has a Web Strap and Ratchet to secure the drum. Factory installed Stainless Steel Cinch Chain and Ratchet Option is available.

Model 85A
Handles ONLY RIBBED a 55-gallon (210 liter) steel drum. Grasp drum and turn by hand. Lock drum upright or at horizontal.

Model 85A has cinch chain and ratchet to secure drum.

Model 85AM
Below-hook drum carrier with Spark Resistant Parts to Handle ONLY RIBBED a 55-gallon (210 liter) steel drum. Grasp drum and turn by hand. Lock drum upright or at horizontal.

Model 85AM has cinch chain and ratchet to secure drum.

Model 85G
Handles ONLY RIBBED a 55-gallon (210 liter) steel drum. Grasp drum and turn by hand. Lock drum upright or at horizontal.

Model 85G has a 3-piece all-metal drum holder with toggle clamp to secure drum.

IMPORTANT: Model 85G will only work with a round drum. If the drum is dented or out-of-round, you may not be able to secure the holder around the drum.