|
Model 85A
|
Morse 85A and 85G Series Below-Hook Drum Carriers
|
Kontrol-Karriers
pour above reach  Drum Karriers
pour within reach 
5-Gallon Pail-Karrier
Adjusto-Karriers
for diameter range 
|
|
|
You manually control drum tilting 360 degrees in either direction. These drum carriers require that you manually grasp the drum to control the drum tilt. The drum carrier can be locked with drum in vertical position for transporting, or locked in the horizontal position to pour. Release tilt-locks on drum carrier for hand-controlled tilt at any angle. Below-hook drum carriers to lift, rotate and control drum pouring within your reach. Turn drum by hand 360o in either direction by hand. Lock drum in upright position for moving. Morse Below-Hook Drum Carriers enable you to move and pour a drum within your reach. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place. The drum carrier can be locked with drum in vertical position for transporting, or locked in the horizontal position to pour. Release tilt-locks on drum carrier for hand-controlled tilt at any angle. Drum Carrier Capacity:
|
Model 85G _pour-drum.png) Pour ONLY a 55-gallon (210 liter) steel drum with Morse model 85G _tilt-drum.png) Lock drum in horizontal position, or at 45 degrees up or down. _upright-drum.png) Lock drum upright for transporting safely Morse model 85G 3-Piece drum holder with toggle clamp  IMPORTANT: This model will only work on a round drum. If the drum is dented or out-of-round, you may not be able to secure the holder around the drum. |
||
| Model # | Drum Carrier Description |
Handle | Domestic Ship Weight |
Domestic Ship Dimensions |
| 85A | Cinch Chain and Ratchet Drum Holder | Handle ONLY a ribbed 55-gallon (210 liter)
steel drum with 22.5" (57.2 cm) diameter between ribs. There is
some flexibility in the drum holder to secure drums that are dented or
out-of round. |
44 Lb. (20 kg) |
L39" W27" H10" (99 x 68 x 25.4 cm) |
| 85AM | Adds Spark Resistant Parts | Handle ONLY a ribbed 55-gallon (210 liter) steel drum with 22.5" (57.2 cm) diameter between ribs. There is some flexibility in the drum holder to secure drums that are dented or out-of round. | 46 Lb. (20.9 kg) |
|
| 85G | 3-Piece Drum Holder | Handle ONLY a ribbed 55-gallon (210 liter)
steel drum with 22.5" (57.2 cm) diameter between ribs. IMPORTANT: This model will only work on a round drum. If the drum is dented or out-of-round, you may not be able to secure the holder around the drum. |
55 Lb. (25 kg) |
|
| Half-Full Drum Rating | ||||
|
* Half-Full Drum Rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum. |
||||
| Morse below-the-hook drum carriers | ||||
|
Morse below-the-hook drum handlers and pail handlers are manufactured by Morse Mfg. Co., Inc.
in Syracuse, NY 13208 U.S.A.
 IMPORTANT:
Every Morse below-hook drum handler is individually load tested at the factory at 125% of rated capacity as per American
National Standard ANSI/ASME B30.20 and ships with a Load Test Certificate enclosed.See Load Test Video Morse drum lifters comply with ANSI/ASME B30.20 standard for mechanical, below-the-hook lifting devices as it applies to the following:
Last Updated: 03/13/19 Morse 85A and 85G Series Below-Hook Drum Carriers to lift, rotate and control drum pouring within your reach. |
||||
IMPORTANT
- It is critical to use the correct holder and accessory to lift your drum type and
dimensions.| California Proposition 65 Information |
 WARNING:
This product can expose you to chemicals including
barium sulfate, cobalt, titanium
dioxide, and 2-methylimidazole, which are known to the State of California
to cause cancer, and bisphenol-A, which is known to the State of California
to cause birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov
|
