morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Tilt-To-Load Drum Tumbler

Parts Diagrams and Operators Manual
for
Morse Model # 310-3-50
Tilt-To-Load Drum Tumbler

 

Tilt-To-Load Drum Tumbler Details
and
Tilt-To-Load Drum Tumbler Video

Tilt-To-Load Drum Tumbler Components Hydraulic
Schematic
Wiring Diagrams Recommended
Spare Parts Kit
Serial # Range Operator's Manual
with Parts Diagrams
Cylinder Hydraulic
Power Pack
Hydraulic
Motor
Motor
302514 to ______ PL310
(295663-______)
4572-P M404-310-P 6319-P HS310-03
(236553 to ______)
3186-3-50-P_wiring RP310-01.01
295663 to 302513 PL310
(295663-______)
4572-P M404-310-P 3114-P HS310-03
(236553 to ______)
3186-3-50-P_wiring RP310-01.01
283821 to 295662 PL310
(283821-295663)
4572-P M404-310-P 3114-P HS310-03
(236553 to ______)
3186-3-50-P_wiring RP310-01.01
 
Control Package (Sold Separately)
Model # Serial # Range Description Operator's
Manual
Control Box
Wiring Diagram
Timer
CP-310-3-230-50 ALL 3-Phase 230V 50Hz OMCP-310(200000-______) 5950-P_wiring Timer Instructions
CP-310-3-400-50 ALL 3-Phase 400V 50Hz OMCP-310(200000-______) 5538-P_wiring Timer Instructions
 
Guard Enclosure Kit (Sold Separately)
Model # Serial # Description Installation Instructions    
GEK-310-3 ALL Guard Enclosure Kit with Safety Interlock Installation Instructions    
 
MSDS for: Hydraulic Fluid

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Last Updated: 08/26/19