morse logo
The Specialist In Drum Handling EquipmentPhone: (315) 437-8475       Fax: (315) 437-1029

Hydra-Lift Drum Rotator parts diagrams

Parts Diagrams and Operators Manual
for
Morse Model # 456-3-50
Hydra-Lift Drum Roller

 

Hydra-Lift Drum Roller details
and
drum roller video

Hydra-Lift Drum Roller Components Hydraulic
Schematic
Wiring Diagram Recommended
Spare Parts Kit
Serial # Range Operator's Manual
with Parts Diagram
Cylinder Hydraulic
Power Pack
Hydraulic
Motor
Motor
303152 to ______ PL456(283648-______) 648-P M404-456-P 6318-P PL456_Hyd-Schem PL290-3-50-2P
(010116-______)wiring
RP456-01
283648 to 303151 PL456(283648-______) 648-P M404-456-P 351-P PL456_Hyd-Schem PL290-3-50-2P
(010116-______)wiring
RP456-01
 
Control Package (Sold Separately)
Model # Serial # Range Description Control
Box
Control Box
Wiring Diagram
Timer
CP-456-3-230-50 ALL 3-Phase 230V 50Hz 5627-P 5627-P_wiring Timer Instructions
CP-456-3-400-50 ALL 3-Phase 400V 50Hz 5628-P 5628-P_wiring Timer Instructions
 
Guard Enclosure Kit (Sold Separately)
Model # Serial # Description Installation Instructions    
GEK-456-3 ALL Guard Enclosure Kit with Safety Interlock Installation Instructions    
 
Options
Option # Serial # Description
POLY-456 ALL Factory Installed Option to roll a plastic drum
POLY-456FI ALL Kit for Field Installation to roll a plastic drum
1-5-1 ALL Idler Attachment to roll a 1 to 5-gallon pail
 
MSDS for: Hydraulic Fluid

Note: OSHA Requirement for enclosure with safety interlock IMPORTANT - OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Last Updated: 06/24/19