CE-Marked Drum Roller includes Enclosure with Interlock and Control Package

Load drum onto roller with model 41 Drum Lifting Hook and your hoist

Close Gate to engage interlock switch

Gate Handle with magnetic closure

Set Timer

Push START button to begin drum rolling

Electric Control Box with Labels

Model 1-5154-1-50-CE

CE-Marked 1-5154 stationary drum roller. 1-phase 220V 50Hz. Includes Control Package, Enclosure with Interlock and Export Crate.

The Morse Model 1-5154-1-50-CE is a stationary drum roller built to mix the contents of a closed 55-gallon drum efficiently and safely. This CE-marked version is designed for use in environments that require compliance with European safety standards. By rolling the drum on its side, it blends materials like chemicals, paints, or powders without the need to open the container, reducing the risk of spills and exposure. The 50 Hz motor and robust construction make it ideal for industrial use, offering reliable performance in manufacturing, processing, or maintenance settings. This drum roller helps improve consistency while supporting safe, closed-system mixing.

All about Model 1-5154-1-50-CE

Specific to Model 1-5154-1-50-CE

Model 1-5154-1-50-CE includes:
- Single Drum Roller with 1/2 HP single-phase 50Hz TEFC motor
- Control Package 5999-P with timer, start/stop, emergency stop and lockable fused disconnect
- Enclosure Kit with Safety Interlock GEK-1-5154-1
Rolls SINGLE drum at 16 RPM, based on 570mm (22.5") diameter
ONLY for country with 50Hz power

All 5154 Series Stationary Drum Rollers

IMPORTANT: OSHA, CSA and CE require enclosure with safety interlock
Roll drums to mix contents
Load horizontal drum onto barrel roller with your hoist or crane and a below-hook drum lifter
Roll STEEL drum with 6" to 28" (15 to 71 cm) diameter, and up to 40" (102 cm) tall
- To roll PLASTIC drum, add POLY Option
- To roll 1-to-5 gallon can, add Idler Attachment(s)
Spring steel grounding strap helps drain possible static charge
Maximum ambient operating temperature: 140° F (60° C)

	F-5626 OPTION: Factory Installed 6' cord & F plug to 1hp/1ph/230v control box. F plug for Austria, Belgium, Czech Republic, France, Germany etc.
	G-5626 OPTION: Factory Installed 6' cord & G plug to 1hp/1ph/230v control box. G plug for United KIngdom.

Not available.

4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

3Spec Sheet

Spec Sheet

Serial range

CE-Marked Drum Rollers

400000 - Current

Enclosures with Safety Interlock for 1-5154 Series

Current

Single Stationary Drum Rollers

Current

5Operators Manuals and Parts Diagrams

Operators Manual

Serial range

Control Packages 5996-P, 5997-P, 5998-P, 5999-P

200000 - Current

Drum Roller

413122 - Current

Parts Diagram

Serial range

Drum Roller

413122 - Current

Idler Wheel

0000 - Current

Operators Manual and Parts Diagram

Serial range

Enclosure Kit Installation Instructions

000000 - Current

1Wiring Diagram

No videos available.

Specifications

Drum RPM	16 RPM RPM is based on 22.5" (57.15 cm) diameter drum.
Liquid capacity	1000 Lb. (454.00 kg)
Dryload capacity	300 Lb. (136.20 kg) A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.

Proposition 65 warning WARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov