Stationary Drum Roller to mix contents of closed drum. Has Air motor.


Specific to model 1-5154-A...
  • Model 1-5154-A is AIR Powered to roll ONE drum
  • Rolls drum at 20 RPM, based on 22.5" (57 cm) diameter
  • Vary drum RPM with air flow and pressure
  • Requires plant air at 20 to 40 psi, flowing at a rate of 22 scfm
  • Air Controls are included: Filter, Regulator, Lubricator and Valve
  • Guard Enclosure with Interlock sold separately as Kit GEK-1-5154-A
All Stationary Drum Rollers...
  • IMPORTANT: OSHA, CSA and EU require enclosure with safety interlock
  • Roll drums to mix contents
  • Load horizontal drum onto roller with your hoist or crane
  • Roll STEEL drum with 6" to 28" (15 to 71 cm) diameter, and up to 40" (102 cm) tall
    • To roll PLASTIC drum, add POLY Option
    • To roll 1-to-5 gallon can, add Idler Attachment(s)
  • Spring steel grounding strap helps drain possible static charge
  • Maximum ambient operating temperature: 140o F (60o C)


Drum RPM20 RPM
Vary RPM with air flow and pressure

RPM is based on 22.5" (57.15 cm) diameter drum.

Liquid Capacity1000 Lb. (454 kg)
Dryload Capacity300 Lb. (136.2 kg)

A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.

Shipping dimensions

Ship length63" (160.02 cm)
Ship width40" (101.6 cm)
Ship height20" (50.8 cm)
Ship weight268 Lb. (121.672 kg)
Ship class70
4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

2845X-P thumbnail image 2845X-P

Fully Enclosed Crate for export of 1 of 1-5154 Series. Crate is heat treated and certified IPPC compliant.

5516X-P thumbnail image 5516X-P

Fully enclosed crate for export of 456 or 1-5154 Series with Enclosure Kit (NOT set up). Crate is heat treated & certified IPPC compliant.

1-5-1 thumbnail image 1-5-1

Idler attachment to roll a 1 to 5 gallon can on a Morse 5154 or 456 Series 55-gallon drum roller

GEK-1-5154-A thumbnail image GEK-1-5154-A

Guard Enclosure Kit and Safety Interlock for customer to install with Morse AIR Powered 1-5154 Series Single Stationary Drum Roller.


Air Motor Service Kit for 290-A-2P

POLY-1-5154 thumbnail image POLY-1-5154

OPTION: Factory Installed on NEW 1-5154 Series to roll PLASTIC drum. 4 Extra wheels and end stops to prevent drum travel.

California Proposition 65 Information

WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov