Variable Speed Portable Drum Roller. Vary drum rolling speed to thoroughly mix drum contents.

Image of 201 Series Portable Drum Roller

Place drum onto base plate of drum mixer with a drum truck

Factory Installed OPTION to roll a plastic drum on Morse 201 Series Portable Drum Roller

Guard Enclosure Kit with Interlock. Shown 201 Series Portable Drum Roller (sold separately).

Model 201VS-575

Portable Drum Roller, Variable Speed. 3-Phase 575V 60Hz Motor. REQUIRES Controls to Start/Stop. OSHA REQUIRES Enclsoure w/ Interlock

All about Model 201VS-575

Specific to Model 201VS-575

Model 201VS-575 has 1/2 HP 3-phase 575V 60Hz motor
Vary drum rolling speed from 15 to 24 RPM, based on 22.5" (57 cm) diameter
Rolls drum on 8 wheels
Roll STEEL drum
- With 6" to 28" (15 to 71 cm) diameter
- Up to 40" (102 cm) tall
To roll PLASTIC drum, add Option POLY-201 with extra wheels and end stop to prevent drum traveling length-ways
To roll 1 to 5 gallon (2 to 20 liter) size cylindrical can, add Idler Attachment 1-5P
REQUIRES Electric Controls to Start / Stop Rotator
Electric Control Package sold separately
- Model CP-201-3-575 for single-phase 575V 60Hz power supply
Safety Enclosure with Interlock sold separately as Kit GEK-201-3

All 201 Series Portable Drum Rollers

IMPORTANT: OSHA, CSA and EU REQUIRE Safety Enclosure with Interlock
Mix contents of a closed drum with a Compact, Portable Drum Roller
Roll closed drum on its side to blend ingredients
Tipping lever assists tilting drum onto roller. Engages drum 30" (76.2 cm) or taller.
Maximum ambient operating temperature for Electric models: 140F (60C) and AIR models 195F (90.5C).
Factors to consider
- Ribs of rigid steel drum prevent traveling length-ways on roller
- Soft sided plastic drums require support of extra wheels and end stop to prevent drum travel
- Fiber drums require a belted drum roller with end stop

	1-5P Kit: Idler Attachment for CUSTOMER to install on 201 Drum Roller to roll 1-5 gal. can. NOT a drum roller by itself. NOT for belted 201B.
	CP-201-3-575 Control Package for 201 Portable Drum Roller. 3-Phase 575V 60Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect.
	gek-201-3 Kit: Enclosure with Safety Interlock for CUSTOMER to install with 201 3-Phase AC Portable Drum Roller. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
	2844Xi-P Fully enclosed crate for export of 201 Series. Heat treated and certified IPPC compliant.
	4109Xi-P Fully enclosed crate for export of 201 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant.
	POLY-201 OPTION: Factory Installed on NEW 201 Series to roll PLASTIC drum. 4 Extra wheels, end stop & tip assist chain. CANNOT order without drum roller.

RP201-01

Optional Kit: Recommended Spare Parts for 201 and 201VS Series. (Click image for list of parts)

4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

1Spec Sheet

1Certificate of Compliance

10Operators Manuals and Parts Diagrams

Operators Manual and Parts Diagram

Serial range

Kit to Roll 1 to 5 Gallon Can

000000 - Current

OPTION to Roll Plastic Drum

286584 - Current

Portable Drum Roller

273783 - 286583

177113 - 273782

Parts Diagram

Serial range

Portable Drum Roller

418760 - Current

418600 - 419759

286700 - 418599

286584 - 286699

000000 - 177112

Operators Manual

Serial range

Portable Drum Roller

286584 - Current

1Recommended Spare Parts Kit

Specifications

Drum RPM	15 to 24 RPM RPM is based on 22.5" (57.15 cm) diameter drum.
Liquid capacity	500 Lb. (227.00 kg)
Dryload capacity	300 Lb. (136.20 kg) A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.

Proposition 65 warning WARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov